Seat Leon Cupra Widebody AWD Built Engine, Now Interior + Further tuning of engine !

mYGeL

Cupra Widebody
Gatebil Rudskogen Trackpics.

only got 2 so far :)

339480_10150920302680168_1501856729_o.jpg


320420_437265902984237_239175078_n.jpg


probably will edit and post some more when i get some more. :)
 

Pyro Tim

Guest
wow, just spent a couple of hours reading this from the start. Very impressive
 

mYGeL

Cupra Widebody
wow, just spent a couple of hours reading this from the start. Very impressive

Thanks. :D hope it was worth the time? :)

Nice pictures. Gatebil where? ;)

Could you not make an copper gasket or something for the wg?

hehe Gatebil Rudskogen Norway :)
Insane track party exhibition event last weekend

www.gatebil.no

We thought of that also. But mounted it yesterday and should be in place even if the bolts unscrew little it should sit tight. but time will tell..

Thinking of a tubular manifold later on instead of this ATP that so far only has given me headache :p

Time will tell. :)
 

Deleted member 74601

Guest
So. I just spent the best part of a few hours reading this whole thread.

Here are my observations.

1. This car is so good, I think I'd let you bum me.

Now if that doesn't tell you how good this car is, I don't know what will.

If I win the lottery I'm driving over to you and we're doing another one up :D
 

mYGeL

Cupra Widebody
Been Away on a short vacation last week came home today :)

Got one Happy Surprice when i came back and visited my work to say hello and watch them work :p

427559_10150944442180168_2027566600_a.jpg


561330_10150944442955168_846474832_n.jpg


564040_10150944444310168_1156446403_n.jpg


Big thanks to
531203_10150944496140168_1780760875_n.jpg


http://www.plasmaprojects.com/

:D

And i went directly to my Tuner and talked about when we can finally go on dyno now that exhaust leaks are sorted. And Probably tommorow or on Thursday we are going to spend all night mapping. And i wont mount the Okada Plasma coils until we have a mapp ready and then do dyno test with OEM coilpacks against the Plasma Direct Coils :)

Also will test different gaps and Different plugs.

I have copper NGK now that we found have given best performance so far.
But i also have ordered a 4 different Champion plugs, i really hope they will arrive before dyno. :)
If not i have 8 of the NGK so we can have Fresh plugs when comparing the coilpacks and gapps.

and also we have a Set of Denso Iridiom Racing line plugs that i hope will work as good as they cost. :p

Tested Denso IK22 IK24 before but they didnt perform as good as we wanted.

Looking forward to test the Coilpacks soon and see how they perform. :D


Also managed to ac tivate the TOG sensor in to FIS display now. :)
405235_10150944964615168_1217236464_n.jpg



Also some Bonus pics :p

One from Gatebil Rudskogen Norway on track again :)
553392_10150945280045168_151864758_n.jpg




Also these that a friend took of the car almost 2 weeks ago
483992_10150928380470168_889703417_n.jpg


548199_10150928462960168_987063340_n.jpg


426841_10150928464490168_186157745_n.jpg


602489_10150928465935168_1578159781_n.jpg
 
Last edited:

mYGeL

Cupra Widebody
cool cant wait to see

im also Anxious to test them and looking forward for the result and and hope and think they will perform good :)


So. I just spent the best part of a few hours reading this whole thread.

Here are my observations.

1. This car is so good, I think I'd let you bum me.

Now if that doesn't tell you how good this car is, I don't know what will.

If I win the lottery I'm driving over to you and we're doing another one up :D

cool that you took the time to read the thread :D

haha ok And Thanks ! :D .. :p hope your not a guy :clown:

I'll be happy to help you just let me know and i'll help you with tips and locate parts and so :)






Don't tease Michel lol

How's the TOG done????


hehe ;)

I failed in VCDS as i couldnt acces the controlmodule for Speedo even tough i had security acces code for it. And we started and connected to the VAS Computer but time ran away. And today after i came to my Tuner V-tech and showed the plasma coils they did a Beta test file and activated it in the Software. So the funktion is there just needs to be correctly activated. And should be able to be done with VAG VAS computer.

or can be activated by the ones doing your software :)
It atleast worked for me.

Sorry for taking the "short" way this time. :p
But can try to find out in VAS also next time how to do it there also :)

But now we atleast now that it can be done on our cars also.
 
Last edited:

Cupra R

Active Member
Dec 5, 2001
2,217
4
UK.
Visit site
I got excited when I saw you had oil temp on the FIS lol.

I can ask, but I don't think it will be something Revo can help me out with to be honest.

If you could get me as much information as possible, itd be much appreciated. Is this VAS computer what the main Seat dealer has or something else?
 
Last edited:

mYGeL

Cupra Widebody
I got excited when I saw you had oil temp on the FIS lol.

I can ask, but I don't think it will be something Revo can help me out with to be honest.

If you could get me as much information as possible, itd be much appreciated. Is this VAS computer what the main Seat dealer has or something else?


ok i hope they can :)
But next time im at my friends work. He works at Seat workshop i can connect to Vas and try to find out exactly what is activated and so.

Activating it with VCDS i failed with. as i couldnt acces right module.
I could avtivate TOG on Channel 39 or if it was 38? But no readings and so on FIS or in VCDS.

Edit: Yes VAS is the Official VAG Computer kinda like the VCDS but it can do more things and is connected to VAG servers and so :)

PS i Pmed you the things ive planned to test to get it working before we did it this way.
Didnt post here as i dont want to post wrongfull information. and im pretty hopefull and think it is the right way to do.
If i can confirm that it works i can post up so all can see, or if you find time to test and se that it works before i have found an occasion to test it.. :)
 
Last edited:

Cupra R

Active Member
Dec 5, 2001
2,217
4
UK.
Visit site
ok i hope they can :)
But next time im at my friends work. He works at Seat workshop i can connect to Vas and try to find out exactly what is activated and so.

Activating it with VCDS i failed with. as i couldnt acces right module.
I could avtivate TOG on Channel 39 or if it was 38? But no readings and so on FIS or in VCDS.

Please mate if you could include some detailed instructions too so that if it comes to it I can go to my local dealers to see if they would do it for me.

Yes, I activated TOG on channel 39. I also recoded cluster for fixed maintenance but with TOG. It was a case of changing something like a 0 to a 2 (off the top of my head) with still no luck as you know.

Fingers crossed. To get this little thing enabled will make mine more or less complete!!!!






























Honestly lol
 

Cupra R

Active Member
Dec 5, 2001
2,217
4
UK.
Visit site
ok i hope they can :)
But next time im at my friends work. He works at Seat workshop i can connect to Vas and try to find out exactly what is activated and so.

Activating it with VCDS i failed with. as i couldnt acces right module.
I could avtivate TOG on Channel 39 or if it was 38? But no readings and so on FIS or in VCDS.

Edit: Yes VAS is the Official VAG Computer kinda like the VCDS but it can do more things and is connected to VAG servers and so :)

PS i Pmed you the things ive planned to test to get it working before we did it this way.
Didnt post here as i dont want to post wrongfull information. and im pretty hopefull and think it is the right way to do.
If i can confirm that it works i can post up so all can see, or if you find time to test and se that it works before i have found an occasion to test it.. :)



Cheers mate. PM replied to. ;-)
 

Rgm racer

Active Member
Sep 22, 2009
317
0
I'm sure its in thread somewhere but to save some time, roughly what bhp and torque is this car now running and is it still on the garret gt30? have you found 4 wd much better on the track than fwd [even with a diff] after allowing for extra weight and drag etc??
 
Progressive Parts, performance parts and tuning specialists