Leon Cupra K1 - Rtech2+ 382bhp 408lbft Fully Forged Build

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
Finally got rid of the standard cupra seats, here are the replacements. A pair of Corbeau RRB sport line. They hold you a lot more than the standard seats do (obviously), also have a lot more lower lumbar support which has made the drive more comfortable.

e9650a451ac9edc4bf0d8c9c8235849f.jpg


d1d27575fde26f1e73fbc28a1528f9cc.jpg


16a06f4a58255893bf660967442ceba5.jpg


Sent from my SM-G925F using Tapatalk
 

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
Nice,they look like they take up a lot less space.
Yeah there is a lot more room all round, passengers in the back get more leg room. Although I need to see if I can find some extended seat rails as could do with going back an extra inch or two on adjustment.

Sent from my SM-G925F using Tapatalk
 

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
Added some audi r8 ignition coils and the red conduit on the weekend, was getting high timing pull so ordered these to fix and put some colour into the engine bay.

0ded1c286ceeb525a06f8b630a7c9cac.jpg


Sent from my SM-G925F using Tapatalk
 

KebabWarrior81

Active Member
Nov 4, 2013
1,841
3
Sandbach,Cheshire
Love the seats Alex seen them when you posted on Facebook.They go really well with the car,did you get the airbag resistor sorted buddy?

Have the R8 coils in mine haven't got the conduit yet but it does make it look better.

Craig
 

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
Cheers Craig it's amazing what difference they have made to the comfort when driving. Managed to get them sorted, made up some resistors the plug on using repair connectors from TPS.

I thought I may as well get some colour as looks a bit dull, wish I'd got the hoses in red instead of black now.

How's yours coming along?

Sent from my SM-G925F using Tapatalk
 

KebabWarrior81

Active Member
Nov 4, 2013
1,841
3
Sandbach,Cheshire
I do like the stock seats but after long journeys I feel like I've been beaten up lol so perhaps a set of them bad boys one will be on order.

It's going well mate cheers she finally goes 2+ soon I've got everything I need and more to help aid the flow/performance so will be good to see how she responds.

Have the same DV return as yours but the red one and it does look good,my stock one had started to sag so it needed changing really.For the money I think they are very good quality and didn't see the point in buying the Forge hose.

If you see me about FB my surname is Leech just so you can put a face to a name kind of thing. :)
 

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
That's exactly why I got rid of mine, not enough support on them. Well if you decide to do the seats I can make and send you some resistors of give you the part numbers and details to do then yourself .

Stage 2+ is where the fun begins! It will be interesting to see what your setup makes as it's got all the best parts for flow on there.

Out of interest what wheels are you running as looking to change mine, think I've got a porous wheel as keeps going flat or the paint is causing it.

Will keep an eye out on there


Sent from my SM-G925F using Tapatalk
 

KebabWarrior81

Active Member
Nov 4, 2013
1,841
3
Sandbach,Cheshire
Top man cheer Alex much appreciated ;)

To be fair she goes well at stage1 but like you say 2+ is the real fun.Fingers crossed all will be good! She responded well to stage1 and produced 306.6/343 completely stock less a panel filter so with all the hardware fitted and a map to complement it should produce a wee animal.

I'm still on stock wheels mate as I do like them but if I ever upgrade one set I'd look at is the Oz super leggera's

Once she's back from mapping I'll add the results to the Tfsi group and my ride thread buddy.
 
Last edited:

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
It's definately enough power to put a smile on your face everything you go out.

I'm still undecided yet, swaying towards 3sdm 0.01, I've seen a few people running those OZ's they look smart!

Got a few bits to tidy up on the gf's leon yet, so it's deciding who's gets done first haha

Sent from my SM-G925F using Tapatalk
 

AlexK1

Active Member
Apr 20, 2014
545
2
Poole
Small update, just a couple of changes.

Fitted the r tech full pcv delete, no pictures of it fitted yet but it's been on a week and is running a lot smoother.

f43e1c0bc2be6c7d66598d59e7cb2f25.jpg


Removed and sprayed the centre console trims satin black, they have come out ok but will probably get our bodyshop to do them properly, was more to see if I wanted satin or gloss black.

cfd4e6a200faf8650225ace94df479af.jpg


a7ba35ad24f06c09cf78d1f63ad32730.jpg


And finally, fitted some new cob led bulbs that required additional resistors to stop them turning off after 4 seconds. Much brighter than the smd leds I had in before, so will see how long these last!

03e031c8404e069a88d5f10df56afe19.jpg


Sent from my SM-G925F using Tapatalk
 

KebabWarrior81

Active Member
Nov 4, 2013
1,841
3
Sandbach,Cheshire
Small update, just a couple of changes.

Fitted the r tech full pcv delete, no pictures of it fitted yet but it's been on a week and is running a lot smoother.

f43e1c0bc2be6c7d66598d59e7cb2f25.jpg


Removed and sprayed the centre console trims satin black, they have come out ok but will probably get our bodyshop to do them properly, was more to see if I wanted satin or gloss black.

cfd4e6a200faf8650225ace94df479af.jpg


a7ba35ad24f06c09cf78d1f63ad32730.jpg


And finally, fitted some new cob led bulbs that required additional resistors to stop them turning off after 4 seconds. Much brighter than the smd leds I had in before, so will see how long these last!

03e031c8404e069a88d5f10df56afe19.jpg


Sent from my SM-G925F using Tapatalk

Nice Update Alex want to do the dash a different colour but can't make my mind up on either satin or gloss black :shrug:

a8V352.jpg


Defo gloss black

Where did you get your steering wheel done buddy looks spot on :)

I'm referring to the outside edge and not the gloss black insert cheers
 
Last edited:

dudes45

Active Member
Feb 4, 2016
11
0
Basingstoke
Just purchased a nice red Leon Cupra K1 to upgrade from my stage 2 golf mk4. Bought the car last weekend from up in Cambridge so had a nice drive back to Poole in it.







The guy I bought it off works in a seat main dealer Bodyshop so got treated to a full body mop before he sold it. Here's a few pictures of it so far, just added a Neuspeed p-Flo to it today.



Updated spec list :



Revo Stage 2+

THS intercooler

Revo intake

Loba HPFP

RS4 valve

Deatschwerks DW65V LPFP upgrade

Rev G diverter valve

AEM water methanol kit

AKS tuning throttle plate for WMI

Devils own WMI inline filter

Devils own WMI solenoid valve

Creation Motorsport runner flap delete

Revision "R" pcv valve

3 inch decat

Revo boost tap

Sachs organic clutch

Loba single mass flywheel

Short shifter

Powerflex anti lift kit

Powerflex front wishbone bush

H&R 30mm springs

034 Motorsport track density engine mounts

Wossner 82.5mm forged Pistons

ZRP rifle drilled forged con rods

King racing bottom end bearings

ARP stud and nut headset

Milltek non res cat back exhaust

Big MFD instrument cluster swap

Corbeau RRB sportline bucket seats

Wow, nice car! I can't wait to modify mine to a similar extent. How loud is it with a decat out of interest? Guessing it won't pass emissions now?
 
SEATCUPRA.NET Forum merchandise