What did you and your MK2 do today?

inahole

Active Member
Jun 27, 2017
13
0
Put it up for sale :(

Pregnant wives aren't to be questioned!!

Sent from my SM-G930F using Tapatalk
 

Daniel M

Blackbelts & Chickenheads
Apr 18, 2013
2,874
7
Middlesbrough
Not today but yesterday, detailed it and took off the headlight tints and plasti-dip off the badges.

They were looking a little worse for wear but, this might be the start of putting it back to standard.
 
Last edited:

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
Got these today ready for my bottom end rebuild

Rifle drilled with 21mm wrist pin to fit on standerd pistons
078200c2bf924a8380cd3537f459ce4b.jpg


leon cupra rtech stage 2, 3inch turbo back , revo intake , r8 coil packs - 323bhp 333ft lb
 

Terry1235

Active Member
Sep 3, 2017
10
0
Paignton
Hi guys I'm new to this site. I've google everything and can't find a guide.
Can anyone help Guide me through the installation process from a standard MP3 stereo to either a rcd 315, rcd 510 or a rns 510 in my seat altea.
Would be looking at buying which ever unit is easiest to install.
Thanks in advance.
 

Terry1235

Active Member
Sep 3, 2017
10
0
Paignton
Stuff it I bought a SH rns 510 from a skoda. So just need to know where I can get a facia from as my original won't fit?
Quick search online and the cheapest I can get is £39.99
 

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
Went to check up on my car today

Engine has been removed and awaits getting stripped so i can have the crank reground with new mains and big end bearings , oil pump reconditioned with a tougher/long shaft so it does not shear off and also have my forged rods installed
5ebc4e1bc6c96bb27f3f91762e41b95b.jpg
2c795d65dffeea072993a948da22df52.jpg


leon cupra rtech stage 2, 3inch turbo back , revo intake , r8 coil packs - 323bhp 333ft lb
 

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
Had the block stripped so it can get rehoned or bores depending on condition
cb343de25cadec66007737664db5380f.jpg


leon cupra rtech stage 2, 3inch turbo back , revo intake , r8 coil packs - 323bhp 333ft lb
 

richicupra

Active Member
Jan 29, 2012
1,826
9
She will sound beautiful after mate!

R-tech stage 2,forged engine , 3inch turbo back , revo intake,AC delete- 323bhp 333ft lb

I hope so, I've already had the cam chain and tensioner done within the last 12 months, but lately having intermittent idle issues/low power and this morning threw an engine light.
 

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
I hope so, I've already had the cam chain and tensioner done within the last 12 months, but lately having intermittent idle issues/low power and this morning threw an engine light.
To do with timing?

R-tech stage 2,forged engine , 3inch turbo back , revo intake,AC delete- 323bhp 333ft lb
 

richicupra

Active Member
Jan 29, 2012
1,826
9
To do with timing?

R-tech stage 2,forged engine , 3inch turbo back , revo intake,AC delete- 323bhp 333ft lb

Yup, had it checked and the timing pulley wasn't doing anything and was stuck at something like -27 degrees. Sounded like a BTCC car cycling on idle.
Replaced the chain as a precaution in case it had been stretched by the non-adjusting pulley.

The code I got from Carista was "P0016 CMP Sensor (G40)/Engine Speed Sensor (G28) Bank 1, incorrect correlation"
 

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
Yup, had it checked and the timing pulley wasn't doing anything and was stuck at something like -27 degrees. Sounded like a BTCC car cycling on idle.
Replaced the chain as a precaution in case it had been stretched by the non-adjusting pulley.

The code I got from Carista was "P0016 CMP Sensor (G40)/Engine Speed Sensor (G28) Bank 1, incorrect correlation"
Did you replace the pulley and tensioner aswell?

And has that solved the issue?

R-tech stage 2,forged engine , 3inch turbo back , revo intake,AC delete- 323bhp 333ft lb build thread: http://www.seatcupra.net/forums/showthread.php?t=440348
 

ECB

Edward CB
Jun 26, 2013
333
15
Northampton
The bonnet paint had gone horrible after a poor respray in the past (before I had the car) and also had a nasty dent above the grill after a football hit it. So got the dent sorted and thankfully my dad for sorted the paint, done a great job, so dead pleased.
fe142414d3789b1c4d76687f12d3ef37.jpg
b6a9d06892f192232edd39539cefe581.jpg
624f89cbe8463b6380f7ff56726e1c20.jpg
a5f1967f2d36b508dd2735f416f1ae2e.jpg


Also someone punched the rear quarter panel outside of a pub, which is now sorted and I’ll polish the panel with the DA over Christmas when I’m off work.
9cfc512480d7c69585ab4302bc854105.jpg
426c3016a40de9c614600a8209d9ec0c.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
SEATCUPRA.NET Forum merchandise