Hi guys, happy new year to you.
Still with the Leon, always get her worked on at JKM.
However the other day I had to go local as my NSR wheel almost jammed up, I am 30 miles from JKM so could not get there.
Local place seemed very good.
New caliper fitted, new discs and pads at the rear.
However driving home brake pedal felt spongy but the garage told me this was only while the new pads and discs bedded in 100 miles time.
However I was waiting at a busy roundabout today and had my foot on the brake, I noticed that it was slowly sinking all the way down to the floor, well almost, by no means moving quickly but was on its way and I found this to be a very unnerving feeling and not one I know.
Went back to the garage and they rebled the system, and while the brakes feel a bit better the sinking pedal still happens.
Now I know there is a specific procedure for bleeding these systems and discussed this with the garage owner, he seemed fully aware of it.
Loads of driving to do next week and worried, can anyone suggest what might be going on, have they shagged my master cylinder? Bloody hope not
Still with the Leon, always get her worked on at JKM.
However the other day I had to go local as my NSR wheel almost jammed up, I am 30 miles from JKM so could not get there.
Local place seemed very good.
New caliper fitted, new discs and pads at the rear.
However driving home brake pedal felt spongy but the garage told me this was only while the new pads and discs bedded in 100 miles time.
However I was waiting at a busy roundabout today and had my foot on the brake, I noticed that it was slowly sinking all the way down to the floor, well almost, by no means moving quickly but was on its way and I found this to be a very unnerving feeling and not one I know.
Went back to the garage and they rebled the system, and while the brakes feel a bit better the sinking pedal still happens.
Now I know there is a specific procedure for bleeding these systems and discussed this with the garage owner, he seemed fully aware of it.
Loads of driving to do next week and worried, can anyone suggest what might be going on, have they shagged my master cylinder? Bloody hope not
Last edited: