Sub8/Carbon/R 370mm Brembo Clearances - OZ

[Scott.T]

Does anyone know if there would be clearance issues fitting 8.5x19 ET44 OZ's over Sub8/Carbon/Cupra R Brembo's

I know it's not so much the offset, but the spoke design. But images of Carbon wheels and Brembo's seem to show its quite close, although they are 8x19 ET50.

Looking into purchase of car plus wheel upgrade to OZ Supertourismo LM's or Ultraleggara's

cheers

 

[Damo H]

Does anyone know if there would be clearance issues fitting 8.5x19 ET44 OZ's over Sub8/Carbon/Cupra R Brembo's

I know it's not so much the offset, but the spoke design. But images of Carbon wheels and Brembo's seem to show its quite close, although they are 8x19 ET50.

Looking into purchase of car plus wheel upgrade to OZ Supertourismo LM's or Ultraleggara's

cheers

@theoldboy has ultraleggeras and the Revo 380mm kit. He’ll know the spec and confirm if he needed spacers. I don’t think he did and have a feeling his where 19x8.

Superturismo LM’s are one of my fav wheels and would look great but are heavier than the ultraleggeras and will hide your brakes. I know JE Design run them on one of their demos, but not sure what BBK they run.

 

[Damo H]

Brembos on both of your wheel options it seems, but this is a wide boy kit so the wheels maybe a wider offset...

https://www.je-design.com/en/seat_leon_5F_ST_Cupra_Widebody.php

 

[Deleted member 103408]

Mine are 8.0x19 5x112 ET45 OZ RACING ULTRALEGGERA HLT no spacers fitted

My stock wheels with ET50 Would not fit

 

[Scott.T]

Brembos on both of your wheel options it seems, but this is a wide boy kit so the wheels maybe a wider offset...

https://www.je-design.com/en/seat_leon_5F_ST_Cupra_Widebody.php

Thanks. They look wider due to the spokes being slightly concave. May just a width change with a ET44/45 offset.

 

[Scott.T]

Mine are 8.0x19 5x112 ET45 OZ RACING ULTRALEGGERA HLT no spacers fitted

My stock wheels with ET50 Would not fit

Do you have any pictures ?
By stock I assume you refer to pre Sub8/Black edition cross spokes.

 

[Damo H]

Mine are 8.0x19 5x112 ET45 OZ RACING ULTRALEGGERA HLT no spacers fitted

My stock wheels with ET50 Would not fit

Your ET50 wheels where the standard Cupra wheels weren’t they.

The Sub8 multispoke wheels I had on my 280, the Performance pack wheels on the facelift and the carbon wheels are also ET50 and fit.

Out of interest did you weigh the ultraleggera HLT. I know the none HLT one in 18” was slightly heavier than my superleggeras that were nice and light for a cast wheel.

Sorry if I’ve asked you this before lol

 

[Damo H]

Do you have any pictures ?
By stock I assume you refer to pre Sub8/Black edition cross spokes.

He has plenty

https://forums.seatcupra.net/index.php?threads/mk-3-280-stage-3.445295/

 

[Deleted member 103408]

Your ET50 wheels where the standard Cupra wheels weren’t they.

The Sub8 multispoke wheels I had on my 280, the Performance pack wheels on the facelift and the carbon wheels are also ET50 and fit.

Out of interest did you weigh the ultraleggera HLT. I know the none HLT one in 18” was slightly heavier than my superleggeras that were nice and light for a cast wheel.

Sorry if I’ve asked you this before lol

Yes the stock wheels that came with the 280 - Red wheels are the OZ running PS4S black is Fox FX004 Running Cup 2 both same size and offset