Dual mass fly wheel, please help!!!

[Tony 156]

Due to the un faultering genius that is VW, I have a Dual mass flywheel worth a good £680ish that is looking like the cause of my problems.

There are aparently two types, a SACHS and a LM002 (<-- think thats the code). Would anyone know with out having the box out which one any particular car would have?

Please help as im loosing faith in my SEAT!!!!!

 

[ibiza-cupra]

£680!!!!surely not had a few on transits etc for around £300

 

[Ibiza Cupra]

Not able to help wit flywheel, but i'm losing faith to, i found the fault to my clutch, now it decides where the pedal sits by itself!!! one minute it has no play, next minute it has nearly 3 inches of play!!! Gotta go to seat on Saturday so might get them to have a look. I know it's not the welds, doubt it's the pedal box, hoping it's not the clutch itself!!!!!

Good luck with yours mate!!!

 

[Tony 156]

Cheers for that one, guna convert to single mass fly wheel i think, means less future problems and the chance for a lighter one.

Did a quick search yesterday but still couldbt quite understand what i need to do it.

Ive got a standard clutch which is 280mm?

So it would be a VR6 Flywheel?

Would i need anything else?

 

[TTS Roadsport]

There is only one part number for the flywheels. You should only have the 225mm clutch in the car too.

If you want to PM me your vin number then i can check??

I can also give you a very reasonable price on a flywheel too!!

 

[m0rk]

VR6 clutch / flywheel is 228mm, not 280

I thought the AYP ran a 220mm flywheel?

There's certainly a 225mm one listed.... but I'm not sure that they ever fitted it to an ibiza

http://www.seatcupra.net/forums/showthread.php?t=88263&highlight=220mm

 

[TTS Roadsport]

AYP and AQX both run 225mm clutches.

AUM pre 2000 golfs run 220mm. And a dual mass too.

All Audi cluches are made by LUK anyway!!

 

[Tony 156]

Thankyou very much for that, the last two days have really confused me on this issue, also i dont have the car back yet so will get back to asap on the VIN number.

Cheers again.

 

[acidstrato]

228mm i believe not 225mm..i had my clutch changed only 2 months ago

and it was a sachs product

 

[Tony 156]

I have found a 2.0 Ibiza engine, would the flywheel off that fit, its MK2 8v.

 

[t18con]

no, 2litre16v has the vr6 flywheel or any g60 car, but no 8v afaik

 

[Tony 156]

Think im on to a winner here, been to my local VW specialist (storm development) and he has a mk5 R32 he says WILL fit.

 

[m0rk]

will he test fit it for free if it doesn't?

 

[Tony 156]

Na, he wants somthing like 380 quid to fit it, he seemed quiet confident that it would and if it dosnt i will chuck it on ebay and get at least my money back.

 

[Jonzy]

380 pmsl!!

Ive just picked up a brand new genuine vw g60 fly with vr6 clutch for 250 quid, local garage has quoted 100 quid for the job.

 

[Tony 156]

Thats a pretty good price, wish it was that kinda price down here.