Explain these codes please

Kris

ESTATE! I'm Getting Old!
Nov 21, 2003
808
0
North Essex
Visit site
Hi,

following on from this thread...
http://www.seatcupra.net/forums/showthread.php?t=94411

Can someone please explain these codes

p0571 (16955) - brake switch `A` cir Malfunction

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean

p1539 (17947) - Clutch switch input circuit `f36` implausable signal

p1602 (18010) - power supply (b+) terminal 30 low voltage

p0501 (16885) - vehicle speed sensor A: range perform

Thanks, :cry: :cry:
 

m0rk

sarcasm comes free
Staff member
May 19, 2001
27,787
33
Clanfield, UK
p0571 (16955) - brake switch `A` cir Malfunction your brake switch is broken

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean your lambda sensor is dead


p1539 (17947) - Clutch switch input circuit `f36` implausable signal your clutch switch is broken

p1602 (18010) - power supply (b+) terminal 30 low voltage you've disconnected your battery

p0501 (16885) - vehicle speed sensor A: range perform your speed sensor is periodically up the swanny

I think you have some wiring issues around the pedal box.
 

D3DNA

Full Member
May 14, 2006
391
0
Cov
Not all of them Kris, mainly the "p1128 (17536) - Bank 1 mixture ADAP (multi) too lean".
 

Kris

ESTATE! I'm Getting Old!
Nov 21, 2003
808
0
North Essex
Visit site
ok, so I had the codes cleared and the only 2 that returned are...

p0571 (16955) - brake switch `A` cir Malfunction

p1128 (17536) - Bank 1 mixture ADAP (multi) too lean

I have realised that my car is in fact not going into Limp Mode, because I still get 5-6psi of boost.

Could either of these codes cause my car to feal sluggish and just not right!

Thanks
 
Adrian Flux insurance services - discount for forum members.