cupra airbox on 1.4TDI help needed!!!!

tdi_chris

2012 Leon 1.2 Tsi Copa SE
Apr 6, 2007
180
0
West Bromwich
www.myspace.com
Right finally got the part from the steelers this morning and i've fitted the new airbox top but there are two things different to my original box!

1. there is a big pipe/hole in the cupra intake which when i start my car lets loads of air out! its in the pic below so what should i do, do i just tape off the hole??
http://i194.photobucket.com/albums/z313/tdi_chris/Photo-0025.jpg


2. there is a small pipe probably no more than 5mm wide that used to fit onto a small hole/tube on my old airbox, what am i supposed to do with this??? See pic link below.
http://i194.photobucket.com/albums/z313/tdi_chris/Photo-0026.jpg

Thanx :(
 

Ric 2001

Need an ID-ten-T form
Do TDi's have a secondary air pump? This is what 1st picture's hole is for
Pump.jpg
 

rashcupra

MV AGUSTA & 1.8T DUB MK4
Oct 15, 2006
6,517
2
crawley
buy the tdi cupra airbox but beware the maf housing is 3"on the tdi cupra where as on the petrol cupra its 2.5" with the tdi airboxyou will have the vaccume pipe and no cold start pipe hole in the side and will be alot better than bodging it up and also look better too
 
Genuine SEAT Parts and Accessories.