0-60 & 0-100 times?

shantybeater

loving the whoosh
Sep 28, 2007
645
0
Bournemouth & Brighton
Hi guys, not had my car long but wouldnt mind knowing what kind of stats i'm pulling? and what i could be...

So anyone who knows can you put down your

0-60 time
0-100 time
current BHP & why
 

Eternal Rage

Scooby & Cordy Powered
Mar 22, 2005
350
0
Manchester
With a KO3S and a remap imagine you are looking at about 0-60's of high 5's

One of the guys our way has a Mk3 Cupra running just a map, filter and exhaust and did a 6.2 off laughing gas and 5.9 on laughing gas (only 25 BHP shot)...

...the Mk3's can be bl**dy quick without fettling a hell of a lot...
 

Wallis22

Active Member
Aug 25, 2007
282
0
Don't know about 0-100, but here's some 0-60 times and BHP figures (From Parkers)

1.4 -14.6. - 60BHP
1.6 - 10.4 - 100BHP
1.8 Cupra - 7.6 - 156BHP
1.8 Cupra R - 7.0 - 180BHP
1.9 SDI - 15.5 - 68BHP
1.9TDI - 11.7 - 90BHP
1.9TDI Sport - 10.4 - 110BHP
 

steve0

Drum-Masta
I have just bought my car, and it has a quarter mile run, with 0-60 time included done at GTi International this year. It ran 5.86 0-60 and about 14.2 quarter; which I think is pretty good. The mods are; full powerflow system, K & N, Forge TIP, Forge FMIC, Forge 007p and a custom remap.
 

shantybeater

loving the whoosh
Sep 28, 2007
645
0
Bournemouth & Brighton
That Ibiza has been around. Like the cupranet slut that thing!

what you getting at? i've heard it before...getting boring now

at the end of the day she's mine now i'm going to look after her properly :redface:....certainly isn't slow thats for sure..even if it does have loads of previous owners

anyway i'm far more of a slut than the car is
 
Last edited:

Dan Cupra R

The Yellow Sub
May 2, 2006
1,514
0
Reading
Had mine timed at GTi international this year. At the time I was just running a map, filter, DV & cat back exhaust and got a 0-62 time of 6.2 seconds. SO i guess its 0-60 in 6 seconds if you wanna get technical:p

0-100 is about 14.9 - 15.0 seconds for me and the best 1/4 mile Ive done yet is 14.8 or 14.7 I cant remember properly
 

Dan Cupra R

The Yellow Sub
May 2, 2006
1,514
0
Reading
Curent now is 203bhp & 238 lb/ft which got rolling roaded in september and seems about right for the mods Ive got. Before that in april it came out on the rollers at 226bhp & 240 lb/ft
 

nick s

256bhp & 282lbs/ft
Dec 9, 2005
396
0
my old ibiza was 256bhp & 282lbs/ft of torque. with really sticky tyres i had it recorded at an airstrip at 5.050 secs to 60mph. never did 0-100mph but i would guess it's around 13 secs.

i expect my elise to do late 3's to 60mph and sub 10 secs to 100mph if driven well :)
 

carlisle pete

Full Member
Mar 25, 2006
649
0
mine were
0-60 in 5.4
0-100 in 11.2


but at the time i had a cracked and warped exhaust housing so time should be fair bit better than that id hope now!!!
 

steve0

Drum-Masta
my old ibiza was 256bhp & 282lbs/ft of torque. with really sticky tyres i had it recorded at an airstrip at 5.050 secs to 60mph. never did 0-100mph but i would guess it's around 13 secs.

i expect my elise to do late 3's to 60mph and sub 10 secs to 100mph if driven well :)

What mods did you have for that power output please mate? Id like to get mine to somewhere around that if poss...
 
Adrian Flux insurance services - discount for forum members.