Custom LCR Splitter
I've never really liked the LCR splitter that came attached to my front bumper when I bought it. I tried to make it fit better by spacing the middle section, but I still wasn't happy with the way it looked. Over the past week or two I've been messing about making a custom splitter out of two LCR splitters. This is a pic of the standard LCR splitter
These are pics of how I bent the ends of the splitter to match the
Cupra bumper. I heated the plastic with a heat gun, bent it into position, screwed it down to the plywood and then left it to cool
In this pic you can see how much I had to bend the ends
I then plastic welded the two halves together
Smoothed over with some fibreglass filler
I also plastic filled this part of the splitter to smooth it out
I then rubbed down the whole piece and sprayed a few coats of filler primer to fill in the textured surface. I then sprayed the splitter to try and match the rest of the
Cupra grilles.