110bhp ASV TDI intercooler pipe part number??

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
does anyone know the part number or were I can get a replacement for the turbo/boost pipe that runs from the turbo outlet to intercooler along the lower timingbelt side of the engine?
 
Jan 8, 2008
528
0
Portsmouth
ok i have in front of me a diagram with intercooler, all pipes and all little parts with individual part numbers, can you give me a pic or better description of which pipe you mean!??
 

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
Must be the hardest pipe to take a picture of!!

Basically its the pipe in green not red. I have also labelled one pipe up with its part number to help you locate things on the diagram.



 
Last edited:
Jan 8, 2008
528
0
Portsmouth
IMG_0289.jpg


This is my Ibiza TDI sport, 110bhp ASV motor, apart from the egr bypass pipe this is all standard, yours is completley dirrerent!?
 

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
Leon not Ibiza. I guess the intercooler on the Ibiza is in a different place so the pipes are routed differently?
All the pipes in red are standard, but the green one i want to replace isnt.
 
Last edited:
Jan 8, 2008
528
0
Portsmouth
ive got the etka diagram in front of me with all part numbers listed, do you know what number it is on the diagram you have? Im not 100% sure!

I Can email you the pic i have if you want? Cant post as its not allowed!
 

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
hmm still difficult to understand!

I think it must be either 10/12 or 10a/12a as i guess the diagram shows two different pipes for different engine codes?
 

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
well i got the pipes!


I still seem to be missing one part though. The ribbed hard plastic one goes on the intercooler ok. then the other attaches to it and goes up to the turbo. buts its way too small. and looking at the turbo outlet it seems there is some kind of clip mechanism that attaches to it. Probably a small plastic bit that goes between turbo > rubber elbow pipe.
Except this part isnt on any of the diagrams I have!!!


As you can see on here this needs some kind of custom clip

Any ideas?
 
Last edited:

brad1

Guest
Yours doesnt need that clip, you have vnt15 turbo, this one picture below, you have the right pipes from two posts above, thay attatch to the tiny turbo outlet ;)

vnt15.jpg

You dont need any connectors, the pipe connects straight to the turbo outlet ;)
 

nick9one1

Active Member
Feb 14, 2010
85
0
Grimsby
I was under the car last week and definitely do not have that turbo. I have the one that needs the clip.

Is there a difference between these turbos other that the mounting? maybe the turbo was replaced at some point and that's why i had a non standard hose??
 
Progressive Parts, performance parts and tuning specialists