no he means stronger bolts.... the original bolts stretch with expansion of the castings when there hot, and may not fully return to the original length when cool = loose bolts.
a higher 'grade' bolt will take much more load (stretch) before perminantly stretching.
I have heard that ARP can provide bolts for this job.
and Nordlock washers get a thumbs up from me, recently got some of these from work and used them on a friends car when fitting a new manifold -> turbo gasket, perfect for the application
a higher 'grade' bolt will take much more load (stretch) before perminantly stretching.
I have heard that ARP can provide bolts for this job.
and Nordlock washers get a thumbs up from me, recently got some of these from work and used them on a friends car when fitting a new manifold -> turbo gasket, perfect for the application
no he means stronger bolts.... the original bolts stretch with expansion of the castings when there hot, and may not fully return to the original length when cool = loose bolts.
a higher 'grade' bolt will take much more load (stretch) before perminantly stretching.
I have heard that ARP can provide bolts for this job.
and Nordlock washers get a thumbs up from me, recently got some of these from work and used them on a friends car when fitting a new manifold -> turbo gasket, perfect for the application
Thanks fella
,are they hex head bolts m10 x 35mm?do I need nuts on them also?thanks for helping me
no he means stronger bolts.... the original bolts stretch with expansion of the castings when there hot, and may not fully return to the original length when cool = loose bolts.
a higher 'grade' bolt will take much more load (stretch) before perminantly stretching.
I have heard that ARP can provide bolts for this job.
and Nordlock washers get a thumbs up from me, recently got some of these from work and used them on a friends car when fitting a new manifold -> turbo gasket, perfect for the application
Are these any good mate or do i need thread all the way up the bolt?
http://cgi.ebay.co.uk/M10-x-35-BLAC..._Material_Nails_Fixing_MJ&hash=item2555cd930e
do you want some stainless bolts and nordlocs?
email me if you do.. [email protected]
Price for 3 inc nordlocs is £15 plus postage
email me if you do.. [email protected]
Price for 3 inc nordlocs is £15 plus postage
No, too short. IIRC they are circa 75mm long..
Just get some from Bill if your not sure what to get
length depends on manifold..
std ones are shorter than those on a jbs or ina/034 manifold for example
std ones are shorter than those on a jbs or ina/034 manifold for example
No, too short. IIRC they are circa 75mm long..
Just get some from Bill if your not sure what to get
Thank you buddy.
Similar threads
