Relocation to cold side re circ with pics

[cuprapowerpaul]

Decided to re-route my Forge p007 valve as it was quite as being near the hotside,

require 1x bung
1x t peice with dv spout
1x silicone piece 25mm

not to happy with the 25mm silicone pipe as there's a slight kink near the pipe housing.
but works and is load with a nice woosshh sound.

 

[harrisard]

I fort when u did the cold side mod the dv t'd from the hose from the inlet mani?? and the dv vented back into the tip!?

someone correct me if I'm wrong!

 

[p34ch3y]

Decided to re-route my Forge p007 valve as it was quite as being near the hotside,

require 1x bung
1x t peice with dv spout
1x silicone piece 25mm

not to happy with the 25mm silicone pipe as there's a slight kink near the pipe housing.
but works and is load with a nice woosshh sound.

errr this is so rong but

i cant even be botherd to go into it as there are so many threads on here about this

SEARCH time

I fort when u did the cold side mod the dv t'd from the hose from the inlet mani?? and the dv vented back into the tip!?

someone correct me if I'm wrong!

no no you dead right this is rong dont realy know how its working realy

 

[p34ch3y]

........................

 

[tom w]

Lol all you've achieved is moving the dv it's still attached to the hot side!!!!

 

[fourtwofive]

Haha wrong side dude!
Put it near the throttle body side. It's still on the hotside

 

[harrisard]

and u want it dumping into the tip not back into the boost pipe!!

 

[cuprapowerpaul]

any one know the correct way then???

 

[Berg]

The t-piece youve put on the charge pipe needs to be on the intercooler pipework coming off the inlet manifold

The bung youve put in the tip needs to be in the charge pipe

then the 25mm hose you have going from the 007p to the charge pipe needs to go into the tip

 

[harrisard]

hi berg in ur pic looks like uve made ur intercooler to inlet mani urself, wot parts did u use as wana do the same but unsure of hose diameter and angles?

cheers harri.

 

[Berg]

To connect to the standard map pip its a 60mm t piece and 2 x 60mm 90 degree hoses

Mine has changed though now as that pic was taken on my old intercooler setup

 

[harrisard]

cheers berg!

 

[cuprapowerpaul]

Is mine totaly wrong set up then it boosts fine and dumps ok?
does it make much difference plumed back into the tip than the charge pipe..

 

[andythom]

It's defo wrong....you'd be getting no benefit from it as it is just now

 

[cuprapowerpaul]

will take apart tomoz and re route then, its does sound the nuts though.

 

[cuprapowerpaul]

added a sound clip of the exsisting set up

 

[harrisard]

that's the noise you would get it u wernt running a dv which would indicate the your dv is not working the way its set up at the mo!

 

[Berg]

As above thats why its fluttering lol, thats not the dv making that noise thats the turbo, dv needs to be plumbed into the tip

 

[cuprapowerpaul]

will this damage the turbo been left that way then?

 

[fourtwofive]

It's not good for your turbo.
Would get this swapped over ASAP mate