How easy is it to strip out interior though and how much does deadening cost and where can I get it? Thanks
A bulk pack of deadener is £80 which will do the whole car. Then the foam can be bought quite cheapy, not sure on the vinyl, not got that far on the research tbh. I reckon it can be done very well for £200 tops.
The interior is very easy to take out
Seat - 4 spline bolts in each corner (cant remember size)
Rear backrests - fold down release the catch at bottom with flat screw driver and pull out
Quarter panels- remove big disk screws under the backrests, then go to an edge and pull
Front door cards - pull off handle trims, remove star head screws, remove torx screws at bottom of doorcards and pull off. Make sure to disconnect wiring etc when the door card is off
Boot panel - pull of latch cover, remove torx screws, pull off access panels, remove exposed torx screws, remove torx screw inside recessed handle, then go to an edge and pull hard
HTH