Cupra - Black n Blue
- Thread starter Dozer360
- Start date
Got some of these to replace a flashing one in my numberplate,
but it was too big So they went in the door
but it was too big So they went in the door
Last edited:
Fitted properly today. Vid to follow when I get back on the pc, iPhone won't upload vids properly.
Last edited:
Had a new light come on my dash the other day
Plugged the laptop in and it had the fault code: 16795 - secondary air injection system: incorrect flow detected
Then checked my air filter setup and the reducer has slid so far up my bodged t-piece it blocks the sai.
Now going to get a silicon t-piece off eBay and if that don't work bill at badger5 can do me an alloy one.
Plugged the laptop in and it had the fault code: 16795 - secondary air injection system: incorrect flow detected
Then checked my air filter setup and the reducer has slid so far up my bodged t-piece it blocks the sai.
Now going to get a silicon t-piece off eBay and if that don't work bill at badger5 can do me an alloy one.
And yesterday I found out my car had a built in swimming pool.
This was because some idiot put a horn in my car and might not have put the pollen filter cover on properly
.
Attempted to fix it today, took the mat out and it's dripping dry in my shower now. And FYI it's a proper pita the fit a soggy air filter back in
.
Managed to get it back in after abut 15 minutes and then saw this under the filter box
I have no idea what it is but it seemed to fit exactly over the clips for the filter box so that's where I stuck it.
Only time will tell if it's fixed (fingers crossed)
This was because some idiot put a horn in my car and might not have put the pollen filter cover on properly
.Attempted to fix it today, took the mat out and it's dripping dry in my shower now. And FYI it's a proper pita the fit a soggy air filter back in
Managed to get it back in after abut 15 minutes and then saw this under the filter box
I have no idea what it is but it seemed to fit exactly over the clips for the filter box so that's where I stuck it.
Only time will tell if it's fixed (fingers crossed)
It seems to have worked, no more leaky air filter.
It's still a bit damp tho so I'll have to get the hair dryer on it soon.
It's still a bit damp tho so I'll have to get the hair dryer on it soon.
Last edited:
Did a few things today:
Taped up the rear washer jet pipe in the passenger side of the boot
Did some more work on my stealth sub box
And I did the remote windows thing with "Motordiag Komfort Manager Lite" but now my remote locking is playing up.
Taped up the rear washer jet pipe in the passenger side of the boot
Did some more work on my stealth sub box
And I did the remote windows thing with "Motordiag Komfort Manager Lite" but now my remote locking is playing up.
I will. Just need to find a place to get one, might wait till I get the car serviced and get them to do it.
I wish it as quicker, I still haven't fitted my top strut that I bought months ago. I'm not keen on drilling my car
first things first, i still have a leak, i dont know how its getting in but the damn water is still getting in through the pollen filter
and does anyone know what this cable is for?, it was just hanging there not plugged into anything
and i fixed my "water but" bodge job with a proper silicon bit, i should be able to clear my fault code now
and does anyone know what this cable is for?, it was just hanging there not plugged into anything
and i fixed my "water but" bodge job with a proper silicon bit, i should be able to clear my fault code now
woo 25 today and just fitted my prezzies from the misses
front wind deflector
rear wind deflector
rear privacy shades
boot privacy shades
now i gotta wait around for an hour while the wind deflectors sticky tape drys on properly
front wind deflector
rear wind deflector
rear privacy shades
boot privacy shades
now i gotta wait around for an hour while the wind deflectors sticky tape drys on properly
some more updates today......ignore the dirty car
i painted my front grills
they were looking a bit gray
i did notice a bit of bad painting on the bumper but ill sort that out at a later date
so i thought id give them a quick lick of paint
covered the badge first
thought id see what the badge looked like blue (highlighter worked a treat lol)
taped up the surrounding area
gave it a quick spray
took the bottom panels off
then had to give the misses a lift so all the tape and bags had to come off
got back then
and gave the bottom bits a quick spray to
then found some glossy clear coat and decided to cover the whole lot wit it so taped it all back up again
(no its not a custom car bra)
all done
pic is poor quality but its a lot better than the gray colour they were
black badge looks cool
i painted my front grills
they were looking a bit gray
i did notice a bit of bad painting on the bumper but ill sort that out at a later date
so i thought id give them a quick lick of paint
covered the badge first
thought id see what the badge looked like blue (highlighter worked a treat lol)
taped up the surrounding area
gave it a quick spray
took the bottom panels off
then had to give the misses a lift so all the tape and bags had to come off
got back then
and gave the bottom bits a quick spray to
then found some glossy clear coat and decided to cover the whole lot wit it so taped it all back up again
(no its not a custom car bra)
all done
pic is poor quality but its a lot better than the gray colour they were
black badge looks cool
Last edited:
then found out my sub has a massive crack in it ![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
can you guess where it is yet
all down the bloody thing
its had some woodglue put on it and its backed with bogroll aswell, just gotta let it dry then give it a try
can you guess where it is yet
all down the bloody thing
its had some woodglue put on it and its backed with bogroll aswell, just gotta let it dry then give it a try
Similar threads
