Pic request and opinions - Leon PD150 lowered on 17's

[4937Liam]

Well im undecided about just how low to go 40mm allround seems safe enough but im also keen on a 50mm/40mm kit so the car levels out fully. But is 50mm for the front too low (I know the sump sitting quite low is an issue to consider) But if u have pics please post them up.

Thanks - Liam.

 

[MarkWales]

not the best of pics here you can see my Black standard Cupra TDi and next but one Andrews Red Lowered Cupra TDI - both PD150 engine both on the stock Cupra 17" alloys

Hope this helps

 

[bruceR]

Got a set of Eibach Sport springs on mine:

 

[Double-6s]

not the best of pics here you can see my Black standard Cupra TDi and next but one Andrews Red Lowered Cupra TDI - both PD150 engine both on the stock Cupra 17" alloys

Hope this helps

That's weird! The fella leaning in the red car's engine bay is my double!!

Maybe eaten a few more pies than me but that's just weird.

 

[UncleFester]

Weitec coilovers and 17" ProRace1.2 wheels.

 

[Gubien]

I had enough trouble with -20 mm H&R spring and my LCR 17" inch wheels. But that was mainly my splitter that hit, and its replaceable )

 

[4937Liam]

Wish I could afford coilovers but im pretty set on the 40mm weitec kit being sold on dpm performance. Im also pretty keen on fitting uprated arb's at some point and i know if you go to low they can rub and be a paint to make work with the low suspension.

 

[Transtellar]

40mm shouldnt be a problem, im about 60mm down on coilovers and on 17" rims, i have to go through the middle of most speedbumps though. I'd put up a pic but trying to get to 15 posts....

 

[MarkWales]

weitec 40 kit is on andrews red one in my earlier picture