xenon auto levelling

[cupra-ads]

so ive lowered my car on h&r springs and now my xenons seen a bit low, well the drivers side one does, has anyone else experienced this? am i wrong? or do they need to be adjusted manually somehow?

 

[yaue10]

I believe that the drivers side is always abit lower than the passenger side so it doesnt dazzle the drivers coming towards you

 

[DEAN0]

so ive lowered my car on h&r springs and now my xenons seen a bit low, well the drivers side one does, has anyone else experienced this? am i wrong? or do they need to be adjusted manually somehow?

With the car lower - the rear axle load sensor thinks you have the car full and has lowered the lights.

There is an adjustment that can be made with VCDS in the ecu to level them.

Alternatively - you could tweek the position of the rear axle load sensor and fool them in to lifting.

 

[johnbev]

You can manually adjust them, park against a wall or something square on. there is an adjustment square/hex type adjuster in the top of the lights towards middle of car it is a white plastic one just turn to see which way up or down it goes against wall etc Mine came back after new lights were fitted and they were pointing at the sky almost

 

[cupra-ads]

thanks johnbev ive done that... probably completely wrong now though haha o well