Bbs reps ?

[NRM 90]

I'm thinking of getting a set of bbs reps size is 8.5j (f) et30 & 10j (r) et30 17" and I want to put 215/40/17 all round ? Will they fit on my cupra ?
Thanks nath

 

[Dimple]

Nope. You'll be scrubbing the paint off the arches and shredding tyres....

 

[NRM 90]

I think the 8.5j will be ok… what do you think ? It's just the 10j lol my arches rolled still don't think it will be enough haha.

 

[sm_cupra]

I run 8.5J ET35 195/40/17 with a 15mm spacer to clear the brakes on the front and i run 10j rears ET35 225/35/17 with no rubbing issues.
The cars now sat with 20mm spacers per side on the rear 10J's but with serious arch work
also wound nearly all the way down on the coilovers..
It is possible

 

[wezza12]

my borbets are 9j alround and im low on coilovers and ther fine so i think ulll be ok oh and my archs are rolled!

 

[NRM 90]

I run 8.5J ET35 195/40/17 with a 15mm spacer to clear the brakes on the front and i run 10j rears ET35 225/35/17 with no rubbing issues.
The cars now sat with 20mm spacers per side on the rear 10J's but with serious arch work
also wound nearly all the way down on the coilovers..
It is possible

Thanks
Thought it would of bin ok there loads of room in the rear for some wide wheels lol
So do you think I'll be ok running the size tyre want to on there.

 

[NRM 90]

my borbets are 9j alround and im low on coilovers and ther fine so i think ulll be ok oh and my archs are rolled!

I really wanted borbet A's until I tried a set of 9s on and didunt fit over the brembo's lol

 

[NRM 90]

I run 8.5J ET35 195/40/17 with a 15mm spacer to clear the brakes on the front and i run 10j rears ET35 225/35/17 with no rubbing issues.
The cars now sat with 20mm spacers per side on the rear 10J's but with serious arch work
also wound nearly all the way down on the coilovers..
It is possible

Have you tried your 10s on the front. I would not be able to resist lol

 

[ndbrgr]

With that much stretch I reckon you'll have just enough room. This is a 215/40 on a 16x9, ET32.


Rolling by Nick Berger, on Flickr

 

[wezza12]

I really wanted borbet A's until I tried a set of 9s on and didunt fit over the brembo's lol

haha lol yea there really tight can just about get a bank card down the bk between the coilover and wheel

ill swap you my borbet A's for ur brembos lol

 

[NRM 90]

haha lol yea there really tight can just about get a bank card down the bk between the coilover and wheel

ill swap you my borbet A's for ur brembos lol

Yeh ok………not lol I think they make the car they are amazing