TT comps on mk 4 ibiza

[D.R.Hseat]

hi guys, I was wondering what in total i had to do for the tt comps to fit my ibiza. I know the pcd is the same i was just wondering what tyres would i have to for to them to stop them scrubbing, also would i have to get my arches rolled.
Thanks

 

[Saint Ibiza]

My guess, and it is that, is 205/40/17 they were what I was looking at previously... but I'm sure someone will be along to correct or confirm. It would also depend on how low your car is too so bear that in mind.

 

[.Si.]

i had tt rims on mine with 205-40-17s on..lowered on coilovers..with just a small amout of rubbing on the front arch liner..
i should have changed to 195-40's but i sold the wheels before hand.

i lowered mine about 50mm over standard

 

[D.R.Hseat]

thanks for the advice guys

 

[barney501]

Heres my Mk4 Cupra on TT comps, FK sport edition plus coilys- no adjusters in rear an about 3 threads left on front with a 205/40/17 tyre combo. Had 15mm spacers on rear but dragged paint of arches!!

 

[Ed_Sutch]

Mine, before I sold it. 195/40's, AP Coilovers.

 

[D.R.Hseat]

thanks for the images guys look really good thanks cant wait to get them sorted

 

[caddyrage]

With 205/40's you'll need to trim down the arch liner and metal where the front bumper meets the wing if going quite low. 195/40's would do the trick on the front.

 

[fuzzy232]

I have scrape on my front do you think it's my arch liner lol

 

[caddyrage]

I have scrape on my front do you think it's my arch liner lol

Definitely, take a look and you'll see a lumpy part where the wing joins the front bumper. Bet there's rubbing marks on it. I cut this section out and also some of the metal tab

 

[fuzzy232]

I'll take a look

 

[cupra.al]

With 205/40's you'll need to trim down the arch liner and metal where the front bumper meets the wing if going quite low. 195/40's would do the trick on the front.

you can run pretty low without going through the trouble of trimming the arch liner.
the height of the cars above doesnt require trimming anything.

 

[fuzzy232]

I'm worried if I drop the back the wheels might touch my paint as I've spaced out by 12 mm

 

[fuzzy232]

Also just checked, I see where my arch liner is rubbed, it's cut holes in it

 

[barney501]

My red ibiza posted above had no adjusters in the back and the front has about 3 thread left on the coilover. Its rubbed holes in the arch liner whenever i hit a little bump.
I had 15mm spacers on the rear and with just me in the car and only the spare wheel etc in the boot it rubbed like mad and started to take the paint off the arches. I either need to run 10mm spacers or have the rear arches flared- not rolled as there is no lip on the ibiza.

 

[fuzzy232]

how do people run so low at the back without it rubbing then ?

 

[barney501]

God knows mate as i would love to go lower but cant put up with the constant rubbing lol!!

 

[fuzzy232]

im going to have to raise the front to match I think

 

[barney501]

How different is yours in height then, my rears about 5mm lower thats it.

 

[fuzzy232]

My adjusters are all the way to the bottom 2 finger gap or so