toozy26
Guest
So just fitted my 3" dp n de-cat. Car drives alot better spins in 3rd as your boosting which it never used to(wet btw) BUT its rubbing on the subframe so rattles on idle..its either my fault as when I tightened the 3 bolts it was against the subframe or its been welded slightly out position on the flange so theres no movement so I cant put the dp more central above the subframe. Anyone had this issue and did you get it sorted also where it mounts onto the exhaust rubber its pulling down almost causing it to pull itself out? :s im gunna loosong the 3 bolts tomo just to see if it come away from subframe then can tighten back up again. Sorry about the essay lol. What do you recon? Cheerss