Which powerflex bushes... Help

[chris_ffx]

Hi there,

Had an mot done recently with 2 advisories for the Front lower (back) suspension arm rubber bush resulting in excessive movement on both sides. I assume this is the wishbone?? (am not very technical if you cant tell hahaa)

So I was going to replace them with powerflex equivalents but looking on the website I don't know which I need, cast or pressed?? I was wondering if someone can help and provide the part numbers??.

I drive a 2005 Leon Cupra R mk1 1.8t 225, I would provide a link to the website but I don't have enough posts!!

Also which ones I would require to replace the Front Anti Roll Bar Mount as there's 3 sizes, might as well get them done at the same time. The cars complete standard too if that helps.

Many Thanks,
Chris

 

[James D1]

you'd need cast ones as LCR wishbones are cast. (they usually say Cupra R only or excluding Cupra R)

as for roll bar it appears to be 19mm as standard on 225bhp models

 

[DamianPM]

Best thing to do is get SEAT to check what size ARB you have fitted from factory.

Damian @ DPM Performance

 

[chris_ffx]

So its the cast ones I need, thank you

Hummm for the arb powerflex do 18mm, 21mm and 23mm.

Damian can they do that over the phone from the reg or will they need to see the car??

Cheers guys.

 

[DamianPM]

Should be able to do it over the phone.

Damian @ DPM Performance

 

[chris_ffx]

Thank you will give them a call cheers.

 

[xDaNx]

On my LCR the roll bar itself is 19mm but with the plastic collars it makes it 21mm, my collars fell off so just fitted 19mm ones.

 

[Ronin225]

Link in my sig with a how and what

 

[BigJase88]

Bar is 19mm unsleeved but bushes required are 17mm (super pro do them)



Stock bar (unsleeved)

Stock bush (so originally a 17mm bush)

If your bar has sleeves at the bushes its simple just knock them off! They will be knackered by now anyways!!



So always fit 17mm bushes to lcr's

 

[chris_ffx]

Thanks for all the help guys, will be ordering them shortly!!

 

[Seal_LCR]

Have a set of polybushed wishbones for sale

 

[dubslife]

Have a set of polybushed wishbones for sale

Hi mate, not allowed to pm you due to post count but how much delivered? and condition of them, age etc. thanks

 

[chris_ffx]

I would have been interested but a friend is doing these really cheap for me as he owes me a favour.

 

[Seal_LCR]

Hi mate, not allowed to pm you due to post count but how much delivered? and condition of them, age etc. thanks

Can't sell on here but of you look for a yellow leon breaking on eBay in Redditch and message me

 

[DaNnY_LaD]

I've got super pro wishbones for sale