Peter's Leon - *Mapped* *Soon to be Stealth*

Petey41

Active Member
Aug 18, 2013
182
0
Northern Ireland
It's the module witch control your central locking, windows and some other things.

Windows work fine as well as the central locking inside the car, just no remote locking. I do remember that before sometimes you would have to push the button on the remote several times before it worked

Sent from my HTC One using Tapatalk
 

J.B.

Active Member
Dec 9, 2013
175
0
Holland
That's good. If i do that only the driver side unlock. I think in your case it's just the key.
 

Petey41

Active Member
Aug 18, 2013
182
0
Northern Ireland
That's good. If i do that only the driver side unlock. I think in your case it's just the key.

That's a bit less of a worry, thanks for your help man! Would you have any idea how hard it is to reprogram? I only have the one key at the minute..

Sent from my HTC One using Tapatalk
 

J.B.

Active Member
Dec 9, 2013
175
0
Holland
If you have Vag Com or VCDS its not that hard. But i can't find the instructions right now. I thought there was one option to do it without vcds.
 

J.B.

Active Member
Dec 9, 2013
175
0
Holland
This is translated from dutch. Maybe it can help.

1. It is necessary that both be used in the car keys supplied, both the key with remote transmitter (A) when the normal key (B) is used.
2. For synchronizing one has a maximum 30 seconds.
3. Key (B) is used to turn the ignition key and (A) is the key to be programmed.
4. Make sure the car is unlocked before starting. Programming
5. Turn the key (B) in the contact position between the positions of the steering wheel and start.
6. Connect with key (A) the end of the driver's door of the wagon.
7. Unlock and then lock the lock of the driver's door with the key (A) while holding down the button (Unlock 1) of the corresponding key is pressed.
8. Take finally the key (B) from the ignition.
 

Petey41

Active Member
Aug 18, 2013
182
0
Northern Ireland
If you have Vag Com or VCDS its not that hard. But i can't find the instructions right now. I thought there was one option to do it without vcds.

Awh not too bad! I have vagcom so I'll get a key and give it a go, cheers mate! :)

Sent from my HTC One using Tapatalk
 

Petey41

Active Member
Aug 18, 2013
182
0
Northern Ireland
This is translated from dutch. Maybe it can help.

1. It is necessary that both be used in the car keys supplied, both the key with remote transmitter (A) when the normal key (B) is used.
2. For synchronizing one has a maximum 30 seconds.
3. Key (B) is used to turn the ignition key and (A) is the key to be programmed.
4. Make sure the car is unlocked before starting. Programming
5. Turn the key (B) in the contact position between the positions of the steering wheel and start.
6. Connect with key (A) the end of the driver's door of the wagon.
7. Unlock and then lock the lock of the driver's door with the key (A) while holding down the button (Unlock 1) of the corresponding key is pressed.
8. Take finally the key (B) from the ignition.

Cheers dude, your a legend!

Sent from my HTC One using Tapatalk
 
Progressive Parts, performance parts and tuning specialists