quick spool turbo thats good for 350+

mikey_b

Active Member
May 18, 2008
322
0
Manchester
im getting it quited cheap under 250 so cant complain if i see 320-330 for now with good torqe that will be good...also will i need to upgrade diff? and whats the best clutch and fly?
 

turbo87

Active Member
Apr 24, 2010
61
0
I dont think you would see more then 310-315bhp to be honest. Clutch wise im running the Jabbasport sinlge mass flywheel and paddle clutch, cant complain at all :)
 

majesty78

Active Member
Oct 6, 2008
490
2
Austria
IHI TD05 16/18/20G will also fit.

Nice options available for 400+hp and quick spool.....

Compared (from left to right)

K03-052 - k04-064 (TFSI) - TD05 20G (old cast style compressor and 12 blade turbine)







About same size as Audi TTRS 5cyl. K16...





Same size TD05 20G in standard compared with Billet wheel option and 9blade quick spool option:







Unconventional "underslung" style jabba sports manifold......









So if you are fine with 350hp, you will normally be good with the slightly smaller 18G compressor and have even faster spool.....
 

mikey_b

Active Member
May 18, 2008
322
0
Manchester
IHI TD05 16/18/20G will also fit.

Nice options available for 400+hp and quick spool.....

Compared (from left to right)

K03-052 - k04-064 (TFSI) - TD05 20G (old cast style compressor and 12 blade turbine)







About same size as Audi TTRS 5cyl. K16...





Same size TD05 20G in standard compared with Billet wheel option and 9blade quick spool option:







Unconventional "underslung" style jabba sports manifold......









So if you are fine with 350hp, you will normally be good with the slightly smaller 18G compressor and have even faster spool.....

Where can I get a quick spool 18g from? When will boost kick in?

anymore info on this will be great as my k03s is starting to get smokey
 
Last edited:

mikey_b

Active Member
May 18, 2008
322
0
Manchester
where can I get a manifold gasket from or will a standard new one fit? iAs for turbo m gonna go with a ihi vf35 for now just picked one up for 180
 

Ibiza sport man

Full Member
Dec 13, 2003
155
0
Kettering
Visit site
Manifold is from jabbasport (If you are lucky to receive a reply, I did not....)

Turbos can be had from Kinugawa:

shopping.kinugawaturbo.com

http://shopping.kinugawaturbo.com/subaru24covertype.aspx

Spool depends on which version (16G/18G/20G and size of turbine housing (7cm or 8cm)

Faster spool is less top end and vice versa ;-)

In a few of the Audi/Elise cars I've built I've used a few Mitsubishi TD05 18G's with a 7 cm exhaust housing. Very quick spool and pretty good power. Nearly makes the 350 BHP you are after.

IainF-boost-s.jpg

IainF-power-s.jpg


Look for JAPWarehouse shop on Ebay.
 
Adrian Flux insurance services - discount for forum members.