Braided Fuel Lines

[ben450]

Hi peeps I want to get the fuel lines that run from the fuel rail in braided stainless steel. I know I need an6 size for that. Question is I want the billet connectors for the ends does anyone know what size I'll need? Thanks for any help.

 

[ben450]

Bump

 

[grahams81]

How you plan on connecting the billet ends to the full rail ?

You'll need a billet fuel rail or cut and weld some fittings to your OEM fuel rail. (or use some of those fake covers over a jubilee clip)

You can get some special fittings to adapt from the OEM quick connectors (Bundy Fittings) of the original lines to AN fittings.

Check out this thread which shows them -

http://forums.vwvortex.com/showthread.php?4946130-REFERENCE-1.8t-Fuel-Lines-Fueling-FAQ

 

[ben450]

How you plan on connecting the billet ends to the full rail ?

You'll need a billet fuel rail or cut and weld some fittings to your OEM fuel rail. (or use some of those fake covers over a jubilee clip)

You can get some special fittings to adapt from the OEM quick connectors (Bundy Fittings) of the original lines to AN fittings.

Check out this thread which shows them -

http://forums.vwvortex.com/showthread.php?4946130-REFERENCE-1.8t-Fuel-Lines-Fueling-FAQ

Cheers matey I just thought they clamped on. The jubliee connectors might be easier then. I'll have a look at that link.