The a/c on my 2011 Cupra is the facelift auto climate control. It all works perfectly from the off, but after after 1/2 hour there is no more air coming out of the main centre dash vents, so instinctively I turn the temp down. The fan speeds up but no air comes out of anywhere useful to cool the car. If I press the button to manually select front vents only, those vents re-open after about 10 seconds and cold air floods out. I then go back to auto and the cycle repeats. After, say 1.5 hours, the manual switch trick no longer works. I can put the a/c onto LO and max. The fan works, but I can't feel the air coming out. Stop for 1/2 hour and all is OK again.
Main dealer has found no codes. Any ideas? If i needed to get to the main vent motor/control is that remotely possible?
Main dealer has found no codes. Any ideas? If i needed to get to the main vent motor/control is that remotely possible?
