Knocking noise

[Jribeiro17]

Hi all,
I've got a seat Ibiza 1.9tdi 2006. I've just replaced the hub complete with bearing (albeit used) as mine was bent and bearing was noisy. I replaced track rid end also. Went to test drive after everything was done and there's a knocking/ metallic clunk noise from the front. I've removed the anti roll bar link and noise is still there and I have also re checked everything was tight.
Any ideas?
Thanks

 

[britishsligean]

Drop links maybe?

 

[R3k1355]

If the hub was bent the chances are the lower arms are, the track rods are, the drop links are and the ARB could be bent too.

 

[Jribeiro17]

Reason the hub was bent was because of an accident to the osf of the car. It's also had a new shock absorber too. I've replaced the track rod end and removed the anti roll bar link and it still knocked

 

[R3k1355]

Did you bother to do the lower arm, the track rod, the top mount???

 

[Jribeiro17]

No because they weren't bent. I found the problem. The garage that done the shock absorber and the wing didn't tighten the shock absorber nut properly therefore was hitting every time I turned the wheel. Problem solved!!

 

[krussel]

Good result. shame on the garage.