Lowering springs

[a22tenc]

I can do better - here is pictures -
http://imgur.com/a/l153F

Those picture don't really help because I can't see the bottom of the spring so I can see where pigtail end is pointed.

Also did you get an alignment after installing the springs ? I didn't yet I'm giving them time to settle so I don't need to do 2 alignments. The car seems to go straight also.

Jamesenty did you do aligment too ?

 

[Quiksilver]

If you have H&R springs then the writing on the springs should be normal and not upside down.
Also it says on them which one are for the front(the buffier) and which one for the rear(slimmer and taller)

 

[a22tenc]

Yes everything is correct in that regard.

 

[Quiksilver]

What springs did you buy?
part number? manufacture?
your car details ?

 

[a22tenc]

H&R 29018-2.

Ibiza FR 1.6 TDI.

 

[Rascal]

anyone know if they are fitting the Ibiza Cupra 6p 1.8 TSI wiht sports select dampers?

 

[Quiksilver]

Hi Apsol, the below was taken from here -
https://www.dcperformance.co.uk/uprated/h_r-lowering-springs/seat/ibiza.html

Seat Ibiza 6J H&R Lowering Springs
Type 6J hatchback and coupe 1.2 inl TSI, 1.4 incl TSI, 1.6, 1.2 TDi, 1.4 TDi, 1.6 TDi, 1.9 TDi, 2.0 TDi
from 861 kg front axle weight
Years: 06/08 >
Part Number: 29018-2

If ours qualify then it should be ok and for Rascal that is also good for our car the 6P 1.8TSI