Interior trim

SwissCupra

Active Member
May 7, 2019
81
44
Switzerland
What do you guys use to clean your interior trims with? Specifically the lower door trims, I tend to scuff mine with my feet getting in and out as the parking spaces aren't huge in our parking garage.
Did try searching, but other than an Autoglym product I didn't see anything else.

Ta.
 
  • Like
Reactions: Oliver Pawley

Jimbobcook

Moderator
Staff member
Moderator
Nov 24, 2012
6,149
2,531
For me if it's black plastic I use meguiars ultimate black... If its metal then probably autoglym metal polish...
 
  • Like
Reactions: SwissCupra

ChrisM75

Active Member
May 10, 2019
423
182
CarPro PERL. Its awesome stuff. Can be used on plastic, engine, rubber and leather (hence the name). Its a water based ceramic dressing, and it does give good protection to any plastic. I use it on tyres as well for a natural sheen. It can be diluted so that if you don't want a gloss it wont leave your dash too reflective.
 
  • Like
Reactions: bruceR

gurpz94

Active Member
Feb 12, 2019
167
72
I used to use Aerospace 303 cleaner but any diluted APC works perfectly fine at around 1:8 - 1:10. If the muck is really stuck on the 1:5 would be better.
 

bruceR

Active Member
Apr 11, 2005
2,538
616
Monifieth, Dundee
+1 for CarPro PERL, so many applications and it can be diluted which makes it even more economical.


Sent from my iPhone using Tapatalk
 

ChrisM75

Active Member
May 10, 2019
423
182
+1 for CarPro PERL, so many applications and it can be diluted which makes it even more economical.


Sent from my iPhone using Tapatalk
Indeed. 1 Litre pretty much makes 5 for most applications. Ive been over the entire interior of my Cupra, the plastic is a little flat on these cars, quite dull, the PERL gives it a darker sheen without leaving it shiny or sticky.