Cupra st 300 needs more noise, Help
- Thread starter paul7619
- Start date
Is yours a copper badged 300 ST? If so a res delete isn’t possible.
If however it’s one first registered before September 2018 then a res delete is a good cheap start. You can get a discount one of the boys at Profressive Parts the site sponsor. Just PM @PP Gareth
If however you’re after a full system, I would not recommend the Miltek. Sure the quad tips look nice but it’s a bad fit on the 4drive. Maybe better if you have a manual FWD 300 ST. I’d recommend better quality Scorpion.
If you do have a Manual FWD ST, then I’d highly recommend the BCS Powervalve system. I loved mine on the 280.
mod howwver you do have a post September 2018 ST, then I’m not sure who does a system for it yet.
If however it’s one first registered before September 2018 then a res delete is a good cheap start. You can get a discount one of the boys at Profressive Parts the site sponsor. Just PM @PP Gareth
If however you’re after a full system, I would not recommend the Miltek. Sure the quad tips look nice but it’s a bad fit on the 4drive. Maybe better if you have a manual FWD 300 ST. I’d recommend better quality Scorpion.
If you do have a Manual FWD ST, then I’d highly recommend the BCS Powervalve system. I loved mine on the 280.
mod howwver you do have a post September 2018 ST, then I’m not sure who does a system for it yet.
Yes the golf r estate exhaust is alot louder. However like Damoh has said if it’s 2018 then a res delete will be perfect.
Sent from my iPhone using Tapatalk
Golf R system is better than standard 300’s. However I’d say it is still too quiet.
This is mine with a res delete as well, and honestly without spending £3,000 on a JE Design or Remus system it’s near enough perfect...
https://www.instagram.com/p/BsLXD_8nEvt/?igshid=ztz1fdle7wu
In that case you’re going to struggle. As you'll need the MY2019 Golf R system, and for the cost of upgrading to that (as you’ll not likely find a second hand one anytime soon) you may as well get an aftermarket system.
Thanks quite fond of it.
Unless Scorpion have done one, I suspect you may be better finding a custom place to make you one.
Ok will a Scorpion 3.15" Non-Resonated Cat-Back Exhaust System. From a golf r 2019 be a straight fit, only asking as its on Demon Tweeks. But not showing if I look for my car, only Milltek on that site
No Golf R system for a standard 300 ST 4driver will be a straight fit as you’ll Need to cut the diffuser to allow for the larger tips.
However that system could be made to fit, depends whether or not it would also need modifying to fit after the GPF/PPF you have on yours.
Having seen the Scorpion system on the golf R, I think the tips are way to small for the opening on the Golf R as you can see all the back boxes due to the tips not fully filling the cut outs...
But may work better on the Cupra...
This is what I said in another thread! Hope it helps!
- Remus Exhaust systems have launched a full-exhaust system upgrade for GPF-fitted Cupra ST300 4Drive models: https://remus.eu/gpf-back-system-l-...roval-796518-0500lr.html?startcustomization=1
- Slight problem is, I've heard rumours that Remus systems aren't super loud - although who knows what 'not loud' means, could be loud enough for me but they're just rumours.
- Supersprint have also launched products for these models: https://www.supersprint.com/ww-en/s...t-leon-5f-st-wagon-cupra-models-with-gpf.aspx
But since I am a novice, I wouldn't even know what to do with all these numbers they just throw at you. The website is certainly catered to people who 'know what they're doing' - and that's not me hahaha!
Based on the rear badges it’s a GPF/PPF 7 speed DSG car.
All the factory copper badged cars are GPF/PPF and 7 speed, but let’s assume that they may of coppered the S badge themselves, the 4 drive badge is on the right. They were on the left previously.
So unless a 300 4drive owner has wanted to make their car appear newer, and coppered the S badge and moved the 4 drive badge, it’s a GPF/PPF car
Similar threads
