What size wheel spacers for Cupra st 4x4

Degs

Active Member
Feb 10, 2019
109
86
North Wales
Hi Scotty. Still in box in garage. I fit them this Sunday, been busy
I've had 12mm front and 15mm rear fitted today with no rubbing,although not carried a lot of weight in it yet,
happy with the look though,as said before looks like it's been lowered slightly.

in0wTtW.jpg
 
  • Like
Reactions: wms_F1

Damo H

Remind me, what's an indicator?
Staff member
Moderator
Oct 3, 2012
4,710
2,804
Car Length In Front
I've had 12mm front and 15mm rear fitted today with no rubbing,although not carried a lot of weight in it yet,
happy with the look though,as said before looks like it's been lowered slightly.

in0wTtW.jpg
Just be warned, it WILL rub if you lower it with those.

I fitted 15mm front (with 2.5 degrees camber due to top mounts), and 10mm rear and rubbed both ends.

It rubs now occasionally with the 10 on the front., Plan on getting another set of 10mm for the rear at some point.
IMG_2499_Small.jpg
 

Degs

Active Member
Feb 10, 2019
109
86
North Wales
Just be warned, it WILL rub if you lower it with those.

I fitted 15mm front (with 2.5 degrees camber due to top mounts), and 10mm rear and rubbed both ends.

It rubs now occasionally with the 10 on the front., Plan on getting another set of 10mm for the rear at some point.
View attachment 10534

Not planning on lowering just yet but the tyres aren't far away on stock set up,i reckon they'll rub slightly if the car
was fully laden,just gives the impression it's been lowered slightly with the wheels nearer the arch and with the wider
track gives it a much better stance,happy with the results for a couple of hundred quid and an hour of my time :coolthumb
 
  • Like
Reactions: Damo H

Semtax

Active Member
Jan 18, 2018
22
25
Just be warned, it WILL rub if you lower it with those.

I fitted 15mm front (with 2.5 degrees camber due to top mounts), and 10mm rear and rubbed both ends.

It rubs now occasionally with the 10 on the front., Plan on getting another set of 10mm for the rear at some point.
View attachment 10534

That looks ace. What 10mm spacers are you using? Im looking for some myself and my Cupra is lowered
 

wms_F1

Active Member
Jul 10, 2018
124
42
I've had 12mm front and 15mm rear fitted today with no rubbing,although not carried a lot of weight in it yet,
happy with the look though,as said before looks like it's been lowered slightly.

in0wTtW.jpg
Looks bang on! Do yo have any more pics? Possibly a side on pic? Thanks
 
Progressive Parts, performance parts and tuning specialists