SPECIAL 3D Printed Leon 1M Parts & Ideas Thread

Leon20vt4

Active Member
Oct 21, 2018
939
683
Hey Gents just wanted to make a thread of all of my progress with my custom parts for our Cupras and Cupra Rs. I will start out with a list of everything that will be made, all designed and manufactured by me here in Germany

If you guys have any requests or ideas please comment below! I would love to here what anyone needs or wants.

List for 2020

Cupra R Canards
Front Diffuser Small
Front Diffuser BIG
Rear Diffuser Fins
Rear Diffuser BIG
Wing Risers or Wing Extension
Gauge pods (DIN/steering column/pillars/vents
Rear Cupra R tow hook cover
Cupra R upper front Grills (honeycomb)
Custom Logos for front grill and rear hatch
Cupra R Jack point covers
Leon 1M custom switch panels
Audi TT jacking points
Induction Kit with trumpet
Heat sheild

For fun

Cupra Shift Knobs
Cupra Keychains
Cupra Wallet/cardholder
Cupra Phone Cases
Custom LED Headlights with LED turningsignal/DRL

What is everyone interested in! This gets me excited what all can be made for our wonderful cars!

Common materials that can be used
ABS
Nylon
TPU
Silicon
Carbon/plastic Hybrids

Sent from my Note_7P using Tapatalk
 

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,195
1,037
Kent
Some very interesting ideas there, I'm particularly intrigued into what the custom switch panel and induction kit trumpet parts entail?

Sent from my SM-G960F using Tapatalk
 

Sparkie

Angling Adict.
Sep 25, 2009
2,541
779
Middlesex
Front logo for me and it’s good to know someone will be producing the jacking covers.
They are highly sought after and like rocking horse sh*% to find.


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
 
  • Like
Reactions: Manic172

Sparkie

Angling Adict.
Sep 25, 2009
2,541
779
Middlesex
Leon20vt4
Are you in #TeamcupraR on fb?
There are always loads of people wanting front grills,badges and jacking covers.


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
 

Leon20vt4

Active Member
Oct 21, 2018
939
683
Leon20vt4
Are you in #TeamcupraR on fb?
There are always loads of people wanting front grills,badges and jacking covers.


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
Ya man I am in the group, i wanted to make a post there end of next week when i have the final draft for front grills done. I am currently setting up the workspace this next week. Then next week I have the time to edit the design and make it perfect. Add the honeycomb and print it in black and take a photo installed on my car.

Sent from my Note_7P using Tapatalk
 
  • Like
Reactions: Sparkie

Connor H

Active Member
Dec 19, 2019
1,014
498
Essex
The induction kit and heat shield options are spicing up my intrigue big time!
Also keen to know more about:

•front diffuser
•Pillar and column pods
•Heat shield - this especially, i think theres a gap in the market here for some bigger better heat shields. Only good one ive seen is a really tall custom one and Badger5's model
 
Jan 29, 2020
2
0
Did the grillies come out nice ? must admit i need new ones for mine, run over a tyre on the motor way after the lorry's tyre infront of me exploded and it cracked up my grille and front bumper :censored:
 

DOLBY

Active Member
Jun 24, 2006
2,934
98
North of London
www.facebook.com
I like some of your ideas but dont post exclusively to that teamCupraR group as i wont be able to see. A group that has one muppet that is on the admin team that decided to ban me for having a constructive criticism of Creation Motorsport TIPs. Which you'll find were discussed extensively on this forum to be a poorer quality...

Anyway can you post pics on here of your ideas?
 

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,195
1,037
Kent
Soo it's not just me that was banned from there for having an opinion and not wanting to suck the admins dicks. Haha

Sent from my SM-G960F using Tapatalk
 
  • Like
Reactions: BadBoy03

DOLBY

Active Member
Jun 24, 2006
2,934
98
North of London
www.facebook.com
Soo it's not just me that was banned from there for having an opinion and not wanting to suck the admins dicks. Haha

Sent from my SM-G960F using Tapatalk
Lol. I'm glad (in a way) it wasn't just me... But you're completely right. A couple of opinions that I had that wasn't very popular that was based on research on here and cos they must of been site sponsors or something they banned me. The admin actually mocked the fact I liked my car by saying "it's just a SEAT" so I replied well you shouldn't be an admin if you don't care about the brand. Calls me a clown on a public page (even though the page doesn't tolerate abuse or bullying and then tells me to FO). Wish I had screen shotted it now as was going to report the page. Love to see him at a meet tbh. Have a quiet word an all...
 

Leon20vt4

Active Member
Oct 21, 2018
939
683
The induction kit and heat shield options are spicing up my intrigue big time!
Also keen to know more about:

•front diffuser
•Pillar and column pods
•Heat shield - this especially, i think theres a gap in the market here for some bigger better heat shields. Only good one ive seen is a really tall custom one and Badger5's model

Induction kit will be an airduct trumpet at the front bumper followed by smooth piping to the location of an 80mm neck filter and coupler to the MAF. Along with the option of having a heatshield included into the package. Heatshield will consist of double layered walls with an air gap in between acting as insulation similar to that of a Hydroflask or other thermos cans. Obviously a space for the cold air feed and it will be held down in place.

Front diffuser will be my of course my custom design, something that is big but not too flashy and of course actually functions! I'm coming from a racing and Autocross family so i have some experience with function over bling.

Column pods will be a custom steering wheel column trim that you install and allows for 2/3 guages to be installed, the idea behind this is the gauges are where your instrument cluster is so you find all the important info in one area.

Pillar pods will be on the A pillar of course custom fit mold specifically for the mk1 leon.

Sent from my RMX1993 using Tapatalk
 
  • Like
Reactions: Connor H

Leon20vt4

Active Member
Oct 21, 2018
939
683
Did the grillies come out nice ? must admit i need new ones for mine, run over a tyre on the motor way after the lorry's tyre infront of me exploded and it cracked up my grille and front bumper :censored:
Working on the grills at the moment. It'll be the first thing done. Final prototyping is going on. Looking to be ready to sell in the last 2 weeks of February. Out of curiosity would you like the OEM slotted style, or Honeycomb grill like the foglights. Would you want it with the S badge, no badge, or for extra cost a custom badge.

Will also be making the upper left and right grills in honeycomb to match!

Sent from my RMX1993 using Tapatalk
 

Leon20vt4

Active Member
Oct 21, 2018
939
683
I like some of your ideas but dont post exclusively to that teamCupraR group as i wont be able to see. A group that has one muppet that is on the admin team that decided to ban me for having a constructive criticism of Creation Motorsport TIPs. Which you'll find were discussed extensively on this forum to be a poorer quality...

Anyway can you post pics on here of your ideas?
Of course my loyalty is with this forum buddy! I wouldn't exclusively post there. Updates will always be done on this thread here! After a few products are done and a website is built i would also look into becoming a forum Sponsor as well.

Which ideas are you most interested in?

Sent from my RMX1993 using Tapatalk
 

Leon20vt4

Active Member
Oct 21, 2018
939
683
Some very interesting ideas there, I'm particularly intrigued into what the custom switch panel and induction kit trumpet parts entail?

Sent from my SM-G960F using Tapatalk
As for the switch panel im still brainstorming how to make it work as there are differences between double din and single din consoles. I will update you tomorrow brother with a few ideas and see what you think.

Sent from my RMX1993 using Tapatalk
 
  • Like
Reactions: Thai-wronghorse

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,195
1,037
Kent
Sounds good mate.
A part that I've seen another mk1 owner make that I liked was a cold air intake coming off the nearside headlight cover trim that screws to the slam panel, it looked very oem.

Sent from my SM-G960F using Tapatalk
 
  • Like
Reactions: Leon20vt4

Leon20vt4

Active Member
Oct 21, 2018
939
683
Sounds good mate.
A part that I've seen another mk1 owner make that I liked was a cold air intake coming off the nearside headlight cover trim that screws to the slam panel, it looked very oem.

Sent from my SM-G960F using Tapatalk
I'll take a look bro! Thanks for the tip!

Sent from my RMX1993 using Tapatalk
 

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,195
1,037
Kent
Found a picture, this bay looks superb and how I want mine.
2ee86d7caf549d29b907d8bc50f22463.jpg


Sent from my SM-G960F using Tapatalk
 

Connor H

Active Member
Dec 19, 2019
1,014
498
Essex
Induction kit will be an airduct trumpet at the front bumper followed by smooth piping to the location of an 80mm neck filter and coupler to the MAF. Along with the option of having a heatshield included into the package. Heatshield will consist of double layered walls with an air gap in between acting as insulation similar to that of a Hydroflask or other thermos cans. Obviously a space for the cold air feed and it will be held down in place.

Front diffuser will be my of course my custom design, something that is big but not too flashy and of course actually functions! I'm coming from a racing and Autocross family so i have some experience with function over bling.

Column pods will be a custom steering wheel column trim that you install and allows for 2/3 guages to be installed, the idea behind this is the gauges are where your instrument cluster is so you find all the important info in one area.

Pillar pods will be on the A pillar of course custom fit mold specifically for the mk1 leon.

Sent from my RMX1993 using Tapatalk

Sounds awesome, i just hope you make them to fit the 180 versions lol.

Will you get an online store or take orders through the forum? Im excited to throw some money at you haha
 

lightup

Active Member
May 27, 2019
324
275
Working on the grills at the moment. It'll be the first thing done. Final prototyping is going on. Looking to be ready to sell in the last 2 weeks of February. Out of curiosity would you like the OEM slotted style, or Honeycomb grill like the foglights. Would you want it with the S badge, no badge, or for extra cost a custom badge.

Will also be making the upper left and right grills in honeycomb to match!

Sent from my RMX1993 using Tapatalk
what about the new cupra ateca style grill ?
 
Progressive Parts, performance parts and tuning specialists