Separate names with a comma.
Anyone know how much the cover (6Y6955435) on its own costs? Mine has done a runner.
Do you just paint the Hammerite on or sandpaper them down etc. first?
Mine has always done that. I was told it's normal :shrug:
Mine has started dropping to 75c on the dual carriageway so I suspect it's the same thing. Do you have to remove the dipstick or can you get to it...
Should fit all the 1.8L petrols and 1.9L diesels.
Are you still having this problem? My right rear seemed to go down from 33 to 12 PSI in about a week :\
If the adjuster doesn't seem to be working, check it hasn't popped off the headlight. This happened to one of mine and took me 5 seconds to fix....
This loom has an earth on both sides annoyingly so I guess I can add a wire to run it back to the passenger side one which goes to the battery.
Sorry..by 'passenger side' I meant 'driver side' :)
I ordered these ones but I can't find anywhere to connect the passenger side earth to. Is there a bolt somewhere around the washer bottle I can use?
I need to get my MOT shortly and I need to replace my HIDs with standard bulbs so it doesn't fail. Last year I had an advisory of 'After market...
Been running Parada Spec 2s for over a year and they are very grippy as long as it's not too wet. Wouldn't want to track day them but they are...
They keep the calipers ridgid, they aren't pointless!
That's how much they were 4 years ago [B)] I paid £18.
They can fix alot using a jig, b post no problem. Can you see that the floor is actually creased?
Similar to what happened to mine and they fixed it up as new. Mine was nearly written off as it was about £6k of damage (including labour) and 2...
But if you have removed the headlights the car was made with, it can fail because of that ;)
How do you know if you need a yellow spring instead of a green one? I have a stage 1 P-Torque map and it's running fine and boosting to 21 PSI on...
I just tested mine again and got max of 199 g/s at 5960 RPM which is about right for stage 1 I think.