Separate names with a comma.
I've fitted a hybrid and all the supporting bits, including the uprated pump.
After finding the bosch didn't fit well I refitted the standard and...
I've spent a lot of money on her lately and really can't afford to keep chucking money at her replacing bits that might not be the cause of the...
I bloody hope so!!
I wondered if I had maybe bent the wire that holds the float.
But after sitting it next to a mate's it appears to be fine......
Got a really weird issue...
I went to fit an uprated bosch fuel pump a few months ago.
Realised it didn't fit the swirl pot properly so refitted...
Mine also does this! Annoying!
Any updates on this???
Look forward to results as I'm running one too...
I would mate but mines currently having the engine rebuilt and hybrid turbo fitted!
54 plate, 55k, mint, silver, stage 2+.
And im only in bath!...
Does it sound more like a stutter?
Like the air coming in is stuttering.
Not the valve fluttering.
If that makes sense? ??
Long nose pliers.
Any of you guys that run hybrid turbos use an uprated head gasket?
Is it needed and where did you find one?
I've had intercooler hoses blow off and had the same but slightly more severe symptoms.
I'd check for boost leaks.
100% badger5 tip. Great piece of kit.
Coupled with a cone filter (I have the jetex) you'll get a bit of whoosh dump.
if you want real noise go...
Nice little collection you got there.
that'll keep you busy for the next few weekends.
Will be keeping an eye on this thread as I'll be looking for stg2 clutches very soon.
Surely a large port one would be ok on a small port head? ??
Wouldn't work the other way round tho.
interested in reading replies to this as my transporter van also does this.
sorry I can't be of any help.
you wont move the turbo by just undoing the top bolts.
the bracket is stuck solid at the turbo side.
do people undo the bracket from the engine side?
if so, what is the best way?
they're hex bolts...
the turbo's 90% off but I can't get the feckin support bracket off!
the bolt at the turbo end is solid.
is it easier to take the bracket...