Separate names with a comma.
The remote part pulls away from the blade so easy replaced .
Just don't lose the immob chip inside.
I'd you only got one key I'd suggest looking...
Always changed mine from a single cr2032 to double cr2016.
Don't ask me why but always found more reliable
Dig up and old thread .as I can never find it .
Mine is 55 plate pre facelift .
Changed to 00151 (still too skitty for me)...
Temp sensor clips in back of the grill. But im sure that's left side .probably doesn't help much
As fozzybear said connect up the supply properly and better still from the battery with a decent guage wire
Start dropping the bass and you'll...
Sounds daft but want to get the low down on vapers the technical side really
Just toying an idea to see if could setup/make a remote one in some...
Spindles snapped off ye ? Tried a breakers at all ?
Maybe able to strip just that bit out from a donor
Like the idea. Would have gone for thinner lines myself though
Could be subtle difference between the two such as the angle of the spindles casting to compensate for the screen rake. Or the length of the rods...
The part number difference would suggest not
The first 3 digits are for the specific model or engine etc
Next 6 are group and sub group .as...
Needs a physical check then to be honest .
Just replaced turbo on same car .previous owner had attempted just the same as you described .resulted...
Maybe you did get too high a boost until it blew the seals through
No limp mode as the sensor never got the chance to read the pressure ??
Ripped door apart to replace the lock mech anyway and found the regulator was missing .ALL OF IT lol
Glass took 2 hours to get down as they...
Might help shed some light in the darkness...
L200 diesel pickup AND a caravan ?
It took cops 40 miles to catch him in God knows what flash BMW/range rover etc
What the hell , lmao...
Don't ask me where exactly sadly but I seem to remember there was a way in vagcom to read the lock switch status 1 n 0 to diagnose door lock...
Likewise hence the suggestion mind you £40 odd ain't too bad
ill get some pics and whip one off measure up etc
May not work out but least it's...
Got a beetle here if anyone wants dimensions off the ones used in that ?
If you know the car details / trans code etc can look up original number and search that way .
Have the fault codes returned ?
Have you tried a decent higher octane fuel in it for a couple tanks ?