Separate names with a comma.
What are my option with Koni? If none what are my other options?
I do not want anything related to eibachs as I have the pro street s coilovers...
Looking for a set of the above for my Mk1 LCR.
Yeah but they could be knocked off copies.
What are the specs of the turbo? Largeport or small?
3 Faults Found:
16804 - Catalyst System; Bank 1: Efficiency Below Threshold
P0420 - 35-10 - - - Intermittent
17524 - Oxygen (Lambda)...
So they bring one out then?
On another thread, you posted it i think.
Read on another post DTA do DBW now, good prices too :whistle:
gt3071 or a gt30r
Its all or nothing now considering the spec of the car now :D
Ive not thought that far ahead yet :)
What are the possible issues with it then?
I've always wanted a Motec, maybe a good reason to move on...
Yes, built a head small port ported head 2 months ago spec of that was:
small port head with port polish
supertech valves inconel & ss
Cracked Exhaust Valves:
Large Port AGU Head Build (New Project)
My large port AGU cylinder head build...
What box is it 6 speed? As you'll need a special security socket.
Eh no, thats not the fill hole, would not recommend putting oil down there, thats the flywheel mark check hole!
No there not there the same size.
Phil forget the eliminator get some worth while and keep the head man!
Done 2500miles now with the std turbo and all seems well. Really notice the difference with the port and poilsihed here, a lot more progressive...
Its a M9 ribe bit unusual size that tend to break at the head. I've used several and the laser one is **** breaks and strips the head of the bolt....
You won't get to 2l without stroking it and moving the pin location further up into the ring land on the piston. You will also be required to...