Separate names with a comma.
guys this is a fantastic thread and I very much want a 1.4tsi 180 engine whether this is in the Skoda/VW or Seat platform I haven't...
Guys are you cutting the foglight surround to allow it to fit the bumper?
And the offending pipe
Heres a pix of mine
Bottom right pipe is the one that means i have to trim my fog light surround[:@]
onizuka - can you provide me the lower alloy pipe;) as looking at your lower grills you dont seem to have had to cut the fog light surround
Yeh the lollipop oil filter should be the one. I had a problem recently where the dealer gave me the swiss roll one and mine had the plastic...
Ive got a spare one in the garage if your thinking of playing with it. PM an offer if you want it ;)
Mikey - would this sit in the undertray with the sticky pads provided?
Orange - you cant just put a thread up like that :( i want more info :) whats the sensor on top for?
so what are you having done to car?
And here to thread 64 http://www.seatcupra.net/forums/showthread.php?t=72735&page=4
Here you go mike - this guy used cupra parts and allards race pipe http://www.seatcupra.net/forums/showthread.php?t=80281
Mike IIRC you can just use the cupra alloy pipe that runs down top side of engine - this uses jubilee cleamps. Couple this with a 90 degrees...
Can I ask why you didnt insert the boost gauge adaptor on the side of the top IC pipe to allow you to fit the engine cover :) Ive had the egr...
in 4th and 5th gear it was like you had to change gear as it felt lik eit was missing. Have you looked at the maf logs? Sounds like you need to...
If you gone 25" cat back but left the dp then i wouldnt have thought this would cause the issue. I would do some logs to check boost and MAF...
Yeh defo the 20vt airbox - why did you change to this airbox?
Well if i do get it fitted i'll get my mapper to change the parameters in the map to prevent limp mode.
Anybody got one fitted? I want to listen to one on the road. Just fitted a cat back non resonated system which i found was quiet, and now...
http://www.briskoda.net/forums/technical-guides/fabia-how-fit-jabba-23mm-anti-roll-bar/51226/ there you go ;)