Separate names with a comma.
Cobra or Piper (if you're feeling flush)
The clips on the tip are jubilee clips and VW one use clips.
Jubille clips are easy, you can unscrew them. The VW one use clips will need to...
It's easy on an LCR, as there's no water pipes in the way. As JDUB has said, it's easiest from above.
I'd recommend a good set of cutters, to...
Are you fitting to a MK1 LC or LCR?
I would check to see if it's this problem:
Drag is increased without the undertray, which will lower MPG
I have the same and can completely agree
I agree with glynnd - Go to the dealers
It could be the resistors in the fan units themselves. Here is a fix http://www.seatcupra.net/forums/showthread.php?t=331943
I would suggest...
Are you running a boost gauge? I wouldn't trust the torque app readings
That would be great if you wouldn't mind mate :)
I'll drop you a text and see when you're free?
Thanks for the info. I did try originally a copper washer, similar to the oem washer.
Where would be the best place to find these fibre gasket...
I read somewhere the Nime box requires your air con to be on, in order for it to work? I'd rather get the resistor mod done if that's the case,...
Following the guide that's already on here (http://www.seatcupra.net/forums/showthread.php?t=365880&highlight=oil+temp+sender), I had a...
Fitted my springs a couple of weeks ago and the problem of the handbrake not returning has been cured :)
Limp mode lottery with the Split R, best of luck if you do buy one.
I voted AmD. They're local to me and have done a great job on my stage 1 map
Get it checked out asap, running lean is very bad
Afraid it'll likely need to be sprayed again. DId the bodyshop have your car at the time to match, or did they just have the bumper?
They've done a fair amount of work on my car and I personally have never had any problems.