Search results

Cheers fella. Mines FZQ then. Got a serious wine in 3rd gear. Been told it will cost about £700 for a rebuild

Did you find an answer to this fella as i need to replace my gearbox. Ive got a 04 225 LCR. Not a clue what the gearbox code is. Can anyone help?

Cheers lads

Sounds about right. I tried to measure them through the wheel yesterday. They worked out about 320mm. Cheers fella

Can anyone tell me the size of my MK1 LCR front discs? They are the standard ones used with the standard Brembo calipers. Thought i would ask before ripping the wheel off to measure them. Thanks

Here is mine fella. Just in 30mm or 35mm Eibach springs. Low enough for me as there is to many sleeping policeman round my area --- I am here: http://maps.google.com/maps?ll=51.880900,-0.181623

was it a ecu remap you mate had done? if so do you know what brand? Or was it a chip soldered direct into the ecu?

Im really struggling to find anyone around my area that can supply me the pvc pipe and end cap. Been to various plumbing suppliers with no joy Im 99% sure i have a leak but cant find it [:@]

Ok fella ill move the connection tonight and see what happens

I spoke to Custom Code dealer near me and they sai it should peak at approx 21-22 psi. Ill do that then mate. Ill post some logs up here as soon as i can Yer ive got a boost gauge fitted. I have the connection in the hose that connects between the n249 and the top on the recirc valve

I'm running a Custom Code Stage 1 map. Also standard intercooler setup. I don't have vagcom myself but I'll have to see if someone in the local area can help me out --- I am here: http://maps.google.com/maps?ll=52.014163,-0.202057

LOL ill have a listen. Oh and i wasnt gonna put me hand near it when it was hot. OUCH!

This is something i havent checked on mine. Wouldnt i be able to hear it pretty clearly or even feel it if i was to put my hand around the manifold on tick over though?

@8bit - Yep tried and tested the 007P even though i have recently brought a new one Here is where i am at with this code. A list of parts i have changed and still dont have a solution Forge 007P Recirc Valve Forge Actuator for K04 Turbo Forge Turbo Intake Pipe N75 Valve N249 Valve PCV...

Great thanks for your help --- I am here: http://maps.google.com/maps?ll=51.987501,-0.201513

cheers boys. Ill give badger5 a message to so he can confirm. he might also have a K04 sitting around

Please someone it won't take long at all. A ruler and 10 mins for your time. Really need to save some time setting it up

Anyone???

Alright people I after a huge favour from someone with a 225 Leon Cupra R (K04 Turbo) I need to know the measurement indicated on the picture below. I need to put my standard actuator back on my LCR A few people's measurements would be a great help. i sure they should all be the...

what gauges do you have now mate?