Hi All,
I need some help here, I want to get some silicon hoses for the secondary water pump and for that I need some pics of what the pipes look like. All I've managed so far is to find pics of pipes that are half hidden. I'd really appreciate if you could post some pics of the complete...
The Rota force alloys have an excellent fitment. I've had the alloys on my car for nearly 4years now and done afew trackday's with them. The best part and the main reason why I bought them is cause the rims are light which works for me as my cars stripped out....
THS 1.8T engine 20mm pins ones, you can either get them direct from them when there in stock or contact Alex Kerr
http://www.thsperformance.co.uk/product/VAG_1.8T_engine_20mm_pins_THSROD-18T20mm
Or you can contact Intergrated Engineering or Bob Quindazzi from http://www.qedpower.com/...
Hi, guys I'm pretty much sure that my cars got a problem with the fans where they start up for a few seconds, shutdown and then start up, I will definitely give the resistors ago and see if that helps.
I have a question in regards to the Fans setup, as my cars a stripped out track day car...
Good luck with the coming year hope the coming year allow you to complete your plan in time for a couple of track days...
Talking about the "twin fan assembly behind the rad and the radiator" have you already done some research on that? I think I have a problem with the fans on my car, they...
Hi, yes you can run the same clutch provided the clutch you have now can keep up with torque figures that your looking at running once the engines rebuilt.
One thing to bare in mind is that you will need a remap or a tweak of your current map.
I've been very lazy and never thought anyone would take any interest :(...
My car was featured in the last Redline Magazine the 171st edition it was a 5 page feature with all the specs and pics.
Hi Willie
I just read through the previous posts again and realised that the clutch u need to replace is for your A4 TDI, instead I sent you a PM for the spare CUPRA R/S3 Clutch Kit I have..
Have u tried giving GSF a call they normally sell Lucas Clutch Kits for VAG Cars at a reaonable price.
Thanks for your reply, I will definitely look at getting the mounting plate as that's a better option of spraying the water meth after the throttle body.
I hope fingers crossed that I don't have to buy a new TB but the symptoms you've described are identical to what was happening to mine. At...
Hey Alex,
The problem's intermittent for a few seconds I can boost away, car drives fine, then all of sudden the car will go in limp mode. I can repeat this process after a stop start.
If the ECU is on its way out can that spoil the MAF and Lambda?
Both the MAF sensor's, one I switched...
Thanks Willie, read the replies on this thread and I went down to the stealer's this morning and placed an order for a new MAF.
Thanks Bill I'll drop rsmith a PM and will also check the wiring to the TB.
I am now considering changing my K&N filter for a Jetex filter. Please let me know if...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.