Search results

  1. tommayo88

    Is there a second Fuse box on exeo st

    Hi Paul Thanks for the reply.... In the end I summited and got an auto electrician to sort the problem..you was right. There was no live feed going the the bulb carriers. The car had a towbar fitted from new and the assumption was that over time the wiring loom must have been chaving when the...
  2. tommayo88

    All the best for 2017

    Happy new year guys......hope it's a problem free year Sent from my SM-A300FU using Tapatalk
  3. tommayo88

    Is there a second Fuse box on exeo st

    Hi all, I'm wondering if there is a second fuse box on my exeo st due to the number plate lights bulbs not working. The bulbs are new and the carriers are new and it is reading out 0.4 on multi meter. I believe this normal due to the canvas system. So my thinking other than the wiring is a blown...
  4. tommayo88

    Key fob question

    Depends if your locksmith is call out...£70 sounds about right if he comes to you... We would charge £42 with vehicle in house Sent from my SM-A300FU using Tapatalk
  5. tommayo88

    Key fob question

    Same.......audi cut out badge shape but is the right chip type and radio frequency to operation my seat exeo. Should be able to get it programmed pretty cheap compared to getting the local dealers to supply and program Sent from my SM-A300FU using Tapatalk
  6. tommayo88

    Key fob question

    Sent from my SM-A300FU using Tapatalk
  7. tommayo88

    MAF Cleaned !

    Good informative post. Well done Sent from my SM-A300FU using Tapatalk
  8. tommayo88

    Seat exeo 3rd brake light and tarnished trim

    Hi aidy, I replaced mine about 2 month. Easy replacement once the front lense is taken off. Dave @ SERE sold me one for £29ish with postage. Not bad when eBay where doing them @ £35 + p&p. Sent from my SM-A300FU using Tapatalk
  9. tommayo88

    Re-mapping

    Hi guys, Just wondering what's a decent price for re-mapping. Been quoted £200 Inc vat. Is this OK? Sent from my SM-A300FU using Tapatalk
  10. tommayo88

    Air Bag light....

    Hi nick, Can't give much info on the removing the seat and sorting the airbag connector bit. Just wanted to mention that disconnecting the battery and left a while could cause a couple of problems. If left too long the immobiliser chip in the key wouldn't be able to communicate with the...
  11. tommayo88

    Leaking boot - help

    Hey guys, it seems to of worked. Didn't noticed any leaks with the boot trim off so I put a beading of clear sealant around the light cluster and that has seemed to prevail. It's bouncing down and has been left for a few hours and no leak. Must be a design fault with the lights being brand...
  12. tommayo88

    Brake light bulb change

    Had the exact same problem with the contacts corroded. Used a file to clean like you did and work for while till the message appeared again. I eventually changed the bulb carrier which showed signs of rust. No brainer @ £16 from dealer with postage. Sounds like a common problem. Sent from my...
  13. tommayo88

    Leaking boot - help

    How did you come across finding it JR? Sent from my SM-A300FU using Tapatalk
  14. tommayo88

    Leaking boot - help

    Thanks chris for the tips. Anything helps when your scratching your head on what to do next. I'm thinking it might be the seals around the window. I think what's needed is to take the the plastic trim off upper/bottom part and get someone to hose pipe the car while I sit in the boot. I...
  15. tommayo88

    Leaking boot - help

    Hi everyone, I'm currently having a problem with water leaking inside the boot door of my exeo estate. I've replaced both lights units with new carriers and replaced the LED rear center brake light thinking it might be the the seals that have failed/perished. Everytime it rains and I set off I...
  16. tommayo88

    Gearstick knob replacement

    Hi, just wondering how easy it would be to change the gearstick knob as mine is scratched to buggery through the wedding ring?? Sent from my SM-A300FU using Tapatalk
  17. tommayo88

    stiff ignition barrel

    I've noticed it on mine. Thinks there is more than one culprit. The electrics on the back play a part. Nothing to worry about. Sent from my SM-A300FU using Tapatalk
  18. tommayo88

    stiff ignition barrel

    Hi, have you tried some lubrication. I work in the locksmith industry doing a lot if dealership work on locks n keys. Try graphite powder but not too much. Sent from my SM-A300FU using Tapatalk
  19. tommayo88

    Sere Motors in NI

    Sorry didn't realise. Thanks for the response though :-) Sent from my SM-A300FU using Tapatalk
  20. tommayo88

    Sere Motors in NI

    Hi bud, just a question.?? I've seen dave from sere motors mentioned a few times on different posts. Is he the best to contact just for joe bloggs *me) as regards to seat parts? Sent from my SM-A300FU using Tapatalk
Progressive Parts, performance parts and tuning specialists