Search results

Thanks for the reply, I'll give that a go as I have run out of ideas and is considering getting rid.

The wiring that goes to no1 piston on my car had damage to the insulation, don't know if this is common or just the result of some heavy handed mechanic. Only spotted it during a service as it didn't cause me issues at the time, might have done later who knows. Maybe something to check for on...

I'm having a few issues with the front door looms so I've decided to check and clean the earths on the car. I've done the 3 under the battery tray, the one under the steering is fine. Does anyone know of any others on the car near the ecu perhaps? I didn't notice any in the boot lid but then I...

Sorry it should read: when pushed the light does not change colour and stays red

Not sure how this is related to my issue but when I push the auto eject button at the bottom of the b-pillar the light would change colour and stayed red. I've read somewhere on here that it's meant to change to Amber once pressed or do I have it wrong. My doors were letting in water as while...

Yes it is, I've checked both rear door wiring looms and still no issue found. I'm in the prosess of taking the drivers door loom to check but please is there anyone who can help. I've phoned 2 mobile auto electricians and both calmly replied by saying no point in throwing money at it.

Forgot to say that I've replaced the car battery, Disconnected the interior alarm sensors and disconnected the alarm horn as I didn't want to cause issues with the neighbours.

The issues with the alarm is ongoing. I've replaced all the door and boot locks, drivers door 3 times. I've checked and cleaned bonnet catch/lock, replaced ccm. Checked the wiring and plugs, as much as is possible without ripping the interior out. Is there anything else to check/replace, any...

I've changed the module and it doesn't seem like any damage was done to my car or the electrics. The one thing that I have noticed is that the remote key fob doesn't work now, probably would need to be programmed.

Hi all, Having issues with the boot lock and once removed noticed that there are 3 pins in the connector. The wires going into the connector are brown, brown/black and blue/green. Can anybody shed some light on which is which. Thanks Ed

Got this in the end, not bad for the price. Does the throttle realignment as well.

Worked with my dad a few years ago and during a slow period wanted to give his tools a clean, promptly got told to stop as the oil and grease stops rust and looks less appealing to those who like to borrow permanently. As for energy drinks, I used to drink the stuff and the wife would love show...

Hi all, I've finally decided on a replacement module, second hand as it's discontinued unfortunately. My question is am I able to just fit this part without any worries as I have been in contact with seat and jkm for programming and seat have warned me that I could have the ecu "lock"...

Got a set off ebay and hour later all the breathers were replaced. Car is running smooth and no more errors. Have to apologise for asking a silly question without actually checking first, sorry guys.

Afternoon all, I've located a vacuum leak on my cupra (180 auq), it's one of the breather pipes under the inlet. It's a short pipe, 130mm, it's got a id of 10mm and steps up to a id of 15mm for the last 25mm and on the pipe is the following number: 06A 103 221 AF. Next to the rocker cover is a...

That looks brilliant, don't worry too much what others think. It's your car and you have to live with it in the end

VWVortex.com - DIY - Replacing the front door window regulator ... forums.vwvortex.com Is what I used for my car, easy enough. Only issue I had was I couldn't get the door lock off with my torx set and had to get a multi spline set.

Thanks, will have to look into getting one soon as the car is driving me mad with all it's issues

Hi, have you bought a reader? I need to do the same but need something that's able to do multiple makes.

Don't bother with the dealers, I got quoted £250 for the back box. ECP don't stock the back box either only the mk4 golf back box. Missus got me a cheap stainless system off ebay.