Search results

first step is healthy engine and mine is not that..132k atm and she's had a bad life and I don't see the point in going anywhere with this block, and then brings me to my question, I know the engine,ecu,engine loom, clocks, keys or immobilizer delete need to be gotten but the fitting part...

As the title States, would a ARL lump from a golf MK4 fit into a mk2 1.9tdi I believe pd105 hp. I guess would the hope look need swapping or just engine loom? Could I run the MK4 ECU on the mk2 Leon? Sorry if it's been asked before, Google really isn't helping Many thanks. Sent from my Nexus...

Hello I have a 1.9tdi and won't communicate with my Bluetooth thingy, 1.8t was fine but this thing keeps giving me grief. Third party stereo fitted but line is cut and still won't communicate. From what I've found so far is the bonnet catch is missing (wires joined together) and pass door when...

Hello I have a TDI (ARL) new to me unfortunately and has a boost issue, will boost to 1.2 bar ISH absolutely fine...go past that, can go to 1.7bar but doesn't, it's like traction control has kicked in, total loss of power, juddering like it wants to stop the car but if I take my foot off then...

Does the hub from euro come with the bearing please? Need one for my TDI and just not sure..for the front. Many thanks Sent from my Nexus 6 using Tapatalk

I know it's not seat talk but does Anyone know of any guides for wiring/ECU for this car? What actual mounts are needed? Please let's not go in about cost or insurance. Sent from my Nexus 6 using Tapatalk

Does this look normal? Friend's car golf gttdi Sent from my Nexus 6 using Tapatalk

As the title state's, anyone used one or know of some info in this. Interested to know the outcome tbh. Sent from my Nexus 6 using Tapatalk

Where in the UK can I buy one in 2017? Would probably like a kit tbh but not sure where to go. eBay I like but surely the UK outfits supply them too. Sent from my Nexus 6 using Tapatalk

So I found this on eBay! A rear bumper with no exgaust cut out [emoji3] didn't know they did this an I've had an idea [emoji23] "forget condition of bumper, it's an example" Anyone done a center exit on a mk1? I've Google searched with loads of different tags but no luck. While on the ramp...

So as the tile says...anyone running this setup with stock ko3/ko4 turbo? Find it any good? Don't really find much info on here about this. Was just wondering if it's a good idea for the longer gear or if that's just for the BT guys to enjoy. Asking because I'm gonna have to swap out the clutch...

I've got the chance to strip a TT 225 apx for cheap and was wondering what's needed to get the job done. Any hidden things I need to know? Have the complete TT so will have things not in the bay out as well. Only thing I am worried about is the fact it's a TT and not a cupra r, so are...

How do i get the window out? What was they thinking when they made this car. So hard to do anything on it Sent from my Nexus 6 using Tapatalk

Hello all. Simple question if you have experience I guess because I can't find a definitive answer. Will a ATP3 back t3 manifold fit our Leon 1.8t auq or is this just for the golf. I wonder because it's back mount I guess you would call it. would it fit in the Leon mk1 or is it a must to have...

So as the title States stripping out a cupra worth it? Trying to get a little more from this old car while I save for rods,BT ect ect. I have the heavy leather interior ATM and binning that for some r front seats in the new year. Anyone have done this ? Worth it or was the noise too much...

Hi all. I've bypassed the n249 and am going to remove to pcv system v soon. Question is..can I connect the boost gauge to the soon to be free inlet manifold connection? Don't see a problem myself but I'm no expert so I ask here for advice

Hello again. I'm looking at two things before I set of in the quest for MORE POWER and that are clutch and flywheel replacement and also the rods. So I'm looking at a g60 flywheel and vr6 clutch, will that bolt straight up? If not what's the best mix of flywheel? I'm going for the light solid...

Hi all. Anyone here from Peterborough have access to an error reader or vag-com OR have a handheld one for sale that works on the Leon mk1 cupra 180bhp auq ? :confused: im a little confused at what to get from e-bay as most of the links on here are dead. Also part's... If anyone has any for...

Hi all. First post and first time owning a seat branded car. Leon cupra mk1 I have just brought on Y reg with full service and 95,000 on the clock and just had a look at it and have really black oil. Have done a change with some shell f/s oil. What's courses this. Last year car has been "off the...