Search results

  1. Leeoncupra

    Seat Leon cr170 TDI FR 09 REG for sale.

    How much are you after pal Sent from my SM-A536B using Tapatalk
  2. Leeoncupra

    Lee's second mk2 leon cupra attempt

    My mate had no complaints at all about their work so give it a go matey I've not heard any horror stories from them Only thing now as I have a mk7 golf r is exhausts are top dollar , I thought miltek exhausts for a mk2 cupra was steep the mqb platform is a different league in pricing Sent...
  3. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    Aha fair play! I do like the tts but your right everyone on the seat forum is more helping but your pal shouldn't have sold you a car he knew was going to be a lemon that should have been that far away it wasn't going to come back lol I wish I bought a mk3 leon cupra instead of the golf r , the...
  4. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    Ahh man I hope its an easy fix I recon a second hand engine would be cheaper , I had a second mk2 cupra not too long ago and that was on 128k and drove miles better than my forged one but it was stock. If you do decide its not worth the money to spend on it.......let me know......I fancy a...
  5. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    https://www.seatcupra.net/forums/showthread.php?t=440348
  6. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    I only ask as that's what mine did and it was my big end bearings Has the car ever been run low on oil? The garages logic behind was when your accelerating the power would force the rod down onto the bearing but when on light throttle with no load on the engine it could move more freely and...
  7. Leeoncupra

    Lee's second mk2 leon cupra attempt

    Only just saw this If its any relevance the work they did was great on mine and fairly priced I know people who have had work at black country exhausts My OG favourite exhaust place has always been rj performance in Birmingham though
  8. Leeoncupra

    precat removal or downpipe

    Not sure on the mk3 platform (I have a mk7 golf r) so I'd be interested to find out I did a precat delete on my old mk2 leon cupra and it actually unleashed alot of power (ran 276bhp on stock map after) Generally they are right at the start on the oem down pipe and are easily removed with a...
  9. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    I only ask as that's what mine did and it was my big end bearings Has the car ever been run low on oil? The garages logic behind was when your accelerating the power would force the rod down onto the bearing but when on light throttle with no load on the engine it could move more freely and...
  10. Leeoncupra

    Cupra k1 bottom end gone .need engine asap

    Does it rattle on light part throttle in higher rpm? There is also a fuel line that rattles on the bulk head aswell you can adjust these in the engine bay but this is usually on idle
  11. Leeoncupra

    Lee's second mk2 leon cupra attempt

    Il put a cupra badge on just for you lol Sent from my SM-G950F using Tapatalk
  12. Leeoncupra

    Lee's second mk2 leon cupra attempt

    [emoji28] Sent from my SM-G950F using Tapatalk
  13. Leeoncupra

    Lee's second mk2 leon cupra attempt

    Should have bought a ibiza bocanegra...you could park it up and god knows if it would start up again incase the timing skips lol Sent from my SM-G950F using Tapatalk
  14. Leeoncupra

    Lee's second mk2 leon cupra attempt

    Aha I always end up coming back , I know where my bread is buttered! So far ownership has been great with the golf and I dont have any intentions of selling just yet. It's a shame really as everyone on this forum are great , I may show my face at a future meet il just stick a cupra badge on...
  15. Leeoncupra

    Hesitation and misfires

    What fault codes are stored on the ecu? Surely it may have logged something to give you a basis to go from matey Sent from my SM-G950F using Tapatalk
  16. Leeoncupra

    Hesitation and misfires

    Bank1 is the pre cat o2 sensor Pcv valve can cause misfires and hesitation on the 2.0 tfsi A quick test is to slacken off the oil fill cap whilst idling and see if the engine noticeably starts hunting and resolves itself once tightened back up Sent from my SM-G950F using Tapatalk
  17. Leeoncupra

    Lee's second mk2 leon cupra attempt

    After selling the caddy I was in the market for a nice mk3 280...but then I found this perfect condition MANUAL golf r appear for sale and I just couldnt turn it down I will own another seat/cupra 1 day after 1 mk1 cupra , 2 mk2 cupras and a mk2 fr tdi on air ride but not just yet [emoji28]...
  18. Leeoncupra

    Cr170 blue+white smoke , constantly idling at 1k

    Thanks for the reply that sounds a good idea never thought an additive would be any use Not long bought the car it's what I've noticed over the last few weeks, I'm a usual seat enthusiast after owning a mk1 leon and 3 mk2 leon cupras/fr but opted for a cr170 Octavia vrs for the bigger boot and...
  19. Leeoncupra

    Cr170 blue+white smoke , constantly idling at 1k

    Hi all Having an issue with my cr170 Car is a 2011 , jf the car is sat in traffic or idling for a short period and then I set off and give it slight welly a big puff of blue smoke comes out the exhaust then followed by puffs of white smoke, just curious where I should be looking first , it...
  20. Leeoncupra

    Aidan's Mk2 Leon Cupra

    For a van I guess it is , kind of fills the void as the cupras replacement lol Sent from my SM-G950F using Tapatalk
Progressive Parts, performance parts and tuning specialists