Search results

For anyone looking to add rain sensing wipers to a Seat Ateca, you may need a different RLHS sensor to the ones mentioned in this thread. 5Q0955547 (A or B) didn't work properly on my 2017 Ateca It gave 3 wipes instead of 1, the sensitivity control didn't work and it messed up the regular...

Hi guys, Thanks for your help with this. I used Don’s advice to code the RLH sensor and then followed this thread; https://forums.seatcupra.net/index.php?threads/rain-light-sensor-coding-mk3-fr.421370/page-9 to enable both the auto lights and wipers. The lights work fine but the wipers act...

That’s a great idea Tell, I didn’t think of that. I use an old tablet for my coding so I don’t mind the risk of installing an older apk. I can’t remember if it’s possible to prevent automatic app updates so I’ll look into that first. How is your house move going?

Thanks Tell, it’s an unexpected problem as I previously activated the rear view camera by long coding with the textural coding so I do think it’s related to the app update I received from ODBEleven. The app update automatically installed, wasn’t able to reject it.

Hi Tell, Thanks for your help, yes, I was following Don’s instructions. It all looked so clear I thought it would be dead easy to code the light switch and sensor, just my luck it’s proving difficult, haha! I’ve left a message on that thread in the hope someone (maybe Don) can point me in the...

Hi Tell, I have fitted a new Rain/Light/Humidity sensor and a new light switch with Auto position and I’m trying to long code the new sensor so I can enable auto lights and auto wipers in Adaptations. Problem is, when I enter module 9 Central Electrics, I don’t get the 1/0 button option to view...

MIB is the headunit in the glovebox. There’s lots of guides online for removing the radio, it’s the same as the Seat Leon, VW Golf Mk7 and Skoda Octavia. Check on YouTube too. Do you have the OBDEleven tool? You need this to do the coding over a Bluetooth connection. The app only works on...

Hi Hec17, You can follow the instructions in a VW Scirocco forum thread, this is what I used. Do a search on the vwroc.com forum for “activate-rear-view-camera-obdeleven-coding” I’m not allowed to post a url on this site yet :-( The important thing to remember is to code the rear view...

Unfortunately it didn’t work. I didn’t have enough time to investigate thoroughly, I wanted to check for continuity on the Video- pin to ground. Will get round to that soon. If it is grounded I’ll modify the camera module to output single ended video, simple but fiddly mod. If that doesn’t work...

I got a little bit further... Applying 12V to the pin with 340k Ohms to GND, the camera drew 70mA from the power supply, about what I expected. So now I think I've identified +12V and GND but the other 2 pins did not output any video when connected to my TV. I managed to dismantle the handle...

Hi Tell, Thanks for continuing to search for the pinout, it's much appreciated :) So, I tried dismantling the handle yesterday to get the camera module out but it's a bit stubborn to say the least! I managed to break one tab off (the plastic is very soft) so I gave up on that for now. I took a...

Sorry for all the double posts!

Thanks. I’m hoping to use the camera I’ve already bought, £59 from eBay item number 253446160577. Still thinking I should be able to find a wiring diagram for the Ateca or Tiguan 2. Both cars are relatively new so it’s tough finding anything useful.

Thanks. I’m hoping to use the camera I’ve already bought, £59 from eBay item number 253446160577. Still thinking I should be able to find a wiring diagram for the Ateca or Tiguan 2. Both cars are relatively new so it’s tough finding anything useful.

Hi Tell, I got my HSD connector for the back of the camera this evening and just discovered the shield has continuity with pin 4 which is labelled Video in that website pinout. The other pins measure Mega ohms or are open circuit, so no clues there. I checked that website again and the camera...

Hi Tell, I got my HSD connector for the back of the camera this evening and just discovered the shield has continuity with pin 4 which is labelled Video in that website pinout. The other pins measure Mega ohms or are open circuit, so no clues there. I checked that website again and the camera is...

Hi Tell, Wow! I think you’re right! Thanks so much for your help, I’ll have a more thorough read tonight and hook up a power supply and check it. I’ll let you know how it goes. Fingers crossed

Thanks very much for your efforts Tell. That cable is a bit costly!! I’ve spent hours looking for the pinout to no avail. One idea I had is to find an Audi or Seat wiring diagram for the camera wiring but every one I’ve seen so far has the video signals on a 2 pin connector. My camera has a...

Hi all, I've been attempting to retrofit an OEM rear view camera to my Ateca, the camera module is part of the tailgate handle. The problem is, the camera I bought did not come with the wiring loom and I've discovered that the short cable that plugs into the camera is not available from Seat...