Search results

The wires seem to be fine, couldn't be the cylinder 1 injector? Maybe at high revs it doesn't sprays properly

Like I said, I've replaced all the spark plugs with a new set of NGK PFR6Q and cyl.1 and cyl, 2 coil packs, I should check the wires but how can I do that properly?

I've replaced Cyl.2 coil pack, the same behavior after exceeding 4500 revs MIL started flashing and after a VAG check cylinder 1 misfire detected (16684 P0300 Random/Multiple Cylinder Misfire Detected 16685 P0301 Cyl.1 Misfire Detected)

I'm gona replace Cyl.2 coil as well, even though after replacing Cyl.1 coil that same cylinder misfired. Thank you for the quik reply !

Hi, I own a Seat Leon Cupra 20VT with a Jabba remap never had any problems but a few days ago when I was giving it a bit of "pedal to the metal" I've noticed a boost drop and the MIL started flashing. The following fault codes were displayed: 16684 P0300 Random/Multiple Cylinder Misfire...

Cheers mate!

It's an MS-Design Seat Altea rear bumper diffuser witch I adapted to fit my FR bumper

Thanks mate :D

Hello, Here is the only picture I have from behind Note that I have mounted the round exhaust tip after mounting the bumper diffuser, without the diffuser I don't think that will suit the bumper very well do to bigger exhaust opening on the original bumper Yes it's 5". Cheers!

I have replaced my front and rear seats with Recaro leather interior and I'm very pleased with the look and comfort. Pics soon...

Impresive car and top job:coolthumb I can see in your pics that the turbo has 5 bolt "GT28 Style" turbine outlet and I know that GT3076R has a 4 bolt turbine outlet http://www.turbobygarrett.com/turbobygarrett/images/catalog/Turbochargers/gt30_pdfs/Garrett_GT3076R_700382_12.pdf, the turbine...

It's a MS-Design Seat Altea defuser and I adapted it to fit my rear bumper

Thank's...I have done most of the work!

The MBC has 3 connectors, where do I have to connect the 3-rd pipe and in what order should I connect them?

What do I have to run without the N75 valve? PS. Thank You for the quick reply!!!:thumbup:

I forgot to tell you that it's a Forge FMICB051 boost controller

Hello, I'm truing to fit a manual boost controller in parallel with the N75 on my car, I' ve searched this thread and couldn't find any details about mounting. Could you please give some hints about mounting? PS. What are the levels of boost pressure you are running right now, overboost and...

The rear "black undertray object" it's a MS-Design Seat Altea rear bumper defuser wich I adapted to fit my rear bumper Regarding the front spliter, as Ruddmeister said "it's the Leon Cupra R part from any SEAT dealer approx £20" and yes it can be fitted to a front Cupra bumper!

Thanks alot mate....

No Problem mate:) Everyone has the right to an opinion!