Search results

powerflex lower engine mount does the trick for this : https://powerflexstore.co.uk/seat/leon-mk3-5f-150ps-plus-2013-multi-link/?filter[DIAGRAM_SPACE_REFERENCE_CF][]=30

whiteline do roll bars for the R, make sure you get the cast bushes for the R arms https://powerflexstore.co.uk/seat/leon-cupra-mk1-typ-1m-2wd-1999-2005/

possibly the lower engine mount : ala number 20 on this diagram : https://powerflexstore.co.uk/seat/ibiza-mk4-6j-2008-2017/

they wont be warped, probably pad transfer from the pads to the discs from not cooling the brakes on the track... Awesomegti.com do brake skimming

the lower engine mount is a great cheap modification :) https://powerflexstore.co.uk/seat/leon-mk3-5f-150ps-plus-2013-multi-link/?filter[DIAGRAM_REFERENCE_CF][]=30

powerflex lower engine mount is a nice cheap mod at about £30 https://powerflexstore.co.uk/seat/ibiza-mk4-6j-2008-2017/?filter[DIAGRAM_REFERENCE_CF][]=20

dont forget to uprate the dogbone while at it to stop the downpipe from rocking around which will give it premature failure https://powerflexstore.co.uk/seat/leon-cupra-mk1-typ-1m-2wd-1999-2005/?filter[DIAGRAM_REFERENCE_CF][]=8&filter[DIAGRAM_REFERENCE_CF][]=9

had a knocking on the front end for a while so ordered up some front wishbone polybushes from here :) https://powerflexstore.co.uk/seat/leon-mk3-5f-150ps-plus-2013-multi-link/

ah you are correct its these then? https://powerflexstore.co.uk/seat/ibiza-mk3-6l-2002-2008/

Yes same as golf 4, you can upgrade to poly ones too https://powerflexstore.co.uk/seat/ibiza-mk4-6j-2008-2017/powerflex-front-strut-top-mount-bush-ibiza-mk4-6j-2008-2017-pff85-430/ they also do them with a 10mm drop to lower the front end a touch

theyre a pressed arm on those, and if genuine arms these would be the bushes https://powerflexstore.co.uk/seat/leon-cupra-mk1-typ-1m-2wd-1999-2005/powerflex-front-wishbone-rear-bush-pressed-arm-leon-cupra-mk1-typ-1m-2wd-1999-2005-pff85-410/ Some cheap aftermarket arms have different sized bushes

Here is the fitting instructions on the []=30']hybrid mount - pretty straightforward

finally got around to fitting the powerflex mount inserts! great upgrade, really noticeable even more so now i realise how worn mine must have been too...

air con!