Search results

Yes I've enabled it via driver's door. I can choose the seconds or off for each coming or living as before but at my parking there is no good lighting and my headlights turn on every time i take the car, so i would like to have the option to have the coming leaving home manually and enable or...

I have the 81A955555A sensor. For now everything works and i don't have any faults stored yet. Edit: i also changed the coming home to automatic from Car Scanner pro, but how do I add this option on my mib2 screen?

Just checked the soft reset when reselecting LIN_REGEN_LICHT_SENSOR and my sensor appeared as it should at the coding page.

Hello, I have one question. I have a 2017 facelift Leon fr and just changed the sensor with 81A955555A, did all the steps but from the drop down coding page, it showing me the old sensor. I did a long coding (00885D) to it. It works but the naming remains. Is it normal or does it have to...

Well. After some time I pulled the trigger and purchased the console as a whole from ebay and with a very quick and simple long coding (5f byte 15 bite 0 and 5) i have wireless charging. The only downside is that I didn't find a glossy one, so i had to put vinyl and it doesn't look as smooth as...

I'm having a rattling sound near the footwell and the transmission tunnel at idle at a specific rpm. Only audible inside the car (a lot). Also when pushing with some force the gear knob forward or right, it stops. And when pulling it backwards it kind of intensifies. Is it sounding familiar to...

Also found a tutorial in the Spanish forum if anyone is interested. https://www.clubseatleon.net/viewtopic.php?t=120263

So after some time in PETKA I found the parts that I need. For the drawer insert: LHD 5f1 857 974a QB(satin black) (7) RHD 5f2 857 974a QB(satin black) For the retaining frame: 5f1 864 089 (10) For the rubber mat: 5f1 863 330b (9) For the wireless charger-...

I'm interested in installing wireless charging in my car but the phone wont fit easily at the front of the gear lever. So If someone has retrofitted the original one, thank you for sharing the part number and some instalation tips if any needed.

I don't know in yours but in the facelift with full led there is also the leveling sensor at the rear axle that has to be removed first and I think you may have to adapt it to the new height. edit: https://www.seatcupra.net/forums/threads/lowering-and-leveling-sensor.468011/

So I was wondering if adding performance monitor option was possible to my car, after reading this thread and in other forums I found that it's possible thru a software update that has bean patched to allow the new Fec to be Verified. If I understand, there is a way installing it with MIB tool...

I think that you won't notice the difference if you do not drag race some friend with similar cars. And if you care about fuel prices then definitely not worth it. So in conclusion if you are not interested in maximizing the power output of your car, a simple box will add some extra boost that...

It's even better if you just buy a quicker car then.

Both need 98 fuel to output maximum power but can adapt to lower octane fuel (95). you can remap both cars with 95 but run it with 98 for better result, but it's better to optimize the ECU to a specific fuel for maximum power output.

If you'll need a mod, the first thing to do is better tires... Then, an lsd would be nice just to be able to put down the extra power with second gear.

It's true that it is not looking good for your turbo so far...

Mine is about 4 to 5 km/h less that what the speedo shows, I had installed an AEM obd II gauge that showed the true speed (verified by gps). It was very useful but swapped it with an analog boost gauge for the moment.

It's better to find the cause than cover it. Using thicker oil could help with the consumption but personally I prefer sticking with manufacturer recommendation. Don't avoid to ask a mechanic to see the car. If the mechanic (group vag specialist) is good at his job, he will find the cause...

First how many Km has your car? For the oil consumption and smoke at acceleration after a stop or slow down with a gear is probably valve seals... but for the power loss and hesitations I don't know, maybe carbon build up? Try cleaning the throttle body with a spray cleaner, if you see a more...

You say that you used to hear a loud wastgate chatter. What is your setup? I have a stage 2 1.8tsi manual but mine is silent. So probably you had a gearbox map and with the faster changes you heard the chatter noise? It's the most probable thing that can have changed since they only changed the...