Search results

They will fit 'IF' they have the arb link bracket on the front shocks. I'm not sure if if KW used a stock shocker casing on the 'A4' platform or they only use the LCR,S3,VRS shock that has the lug welded in place on just those models. Also the spring rate will be slightly different. If you get...

It will fit the Leon Cupra but not Cupra R.

I think you should stick to the figures above,To tight and they could snap.

http://www.ecstuning.com/Audi-TT_MKI-FWD-180HP/Drivetrain/Clutch/ES125/ This may help. Installation Tips: Torque Flywheel to crank 60Nm.(44ft.lbs.) + 1/4" turn (90deg)Torque Pressure Plate to Flywheel 20Nm.(15ft. lbs.) This is for SMF.

If you have a Leon Cupra and have standard 312mm brakes then 16" is the min you can fit to clear the front discs.

Go for the Pro Race 1.2's. You can get them in whatever offset you require if your not in to much of a rush. I have a set of 17's et38 if you want to try one for size. PM if you want me to bring one in,as i will be coming in for Revo map in a few weeks.

Did you fit the new tyres after you have the steering alignment done?

This may help you out.Do try and get a box with similar ratios. http://www.turbo-conversion.com/16v-turbo-conversion/16v-turbo-conversion/54

I have just got hold of a spare rocker cover and intake manifold so i can paint them. Can anyone recommend a good product to clean these up before painting? Hopefully they will probably be winkle black finish. TIA

RARB Dogbone mount bushes These 2 would be the 1st things i would do.

Good choice on Helmet. I have the Sparco Pro Jet in Silver. Car is coming along nicely,keep up the good work.

x 1.3 IIRC

The rear bush (comes in 2 pieces) is easy as it's just a matter of undoing the retaining bolt that holds them together. Front bush is a little more difficult,but with the aid of a bench vice and a socket the correct size it's easy enough.Just a matter of using a socket which is just smaller...

Cheers for the info,it did help.Managed a few laps @ Castle Combe with thr R888's and it was a big improvement from last year. http://s109.photobucket.com/albums/n61/jaymd1970/?action=view&current=IMG_0088.jpg&newest=1 I didn't get chance to fit this before CC,it's fully bushed up with the...

Re: LCR light weight edition, New gear box with Wavetrac LSD fitted :) Willie what tyre pressure are you running the R888''s at? Just got a set for the fronts of my track wheels (pirelli assimetrico's on rear) and R888 for the front.

RARB = Rear Anti Roll Bar

Boiling hot water from a kettle usually helps.

This strange as someone else has had the same thing happen. There is a fix. http://www.dieselgeek.com/servlet/Detail?no=468

Heard a few bad reports on the supertech valves. Latest being Steevie Wonder's.

Yes tapered bolts.Radius are more rounded.