Search results

Hi, could you possibly post up the part number for the battery box and any associated fittings required. Cheers, Tasha.

Does anybody know how much stuff there is to remove on the other side of the bulkhead i.e. under the dash board? I removed all the stuff under the bonnet about 3 years ago but never got round to removing the dash and seeing what's under there but it's on the "To do" list.

Hi, the silver cross 3D pram system is what we had and that fits fine, was a nice pram also and converts in to a push chair for a bit later on.

Lots of pictures here, not just black though. http://www.seatcupra.net/forums/showthread.php?t=248015&highlight=Show+intercooler

It's a location/lock down pin off an lorry trailer, the sort that carry the 20' or 40' containers for shipping stuff around the world, most of them are welded on but some trailers have sliding ones so they can be adjusted to take odd size containers.

More info, http://www.seatcupra.net/forums/showthread.php?t=296003

Hi, they are indeed good times you are running, although it's not unheard of, both my car and Ibizalex were running these times 3-4 years ago at pod and inters running k03. It's been quite some time since I have looked at any slips but I seem to remember one being 14.00 with a terminal of 99.6...

Hi, yep this is an old problem have a look at this thread from 2008, all the info you need to make it fit better. http://www.seatcupra.net/forums/showthread.php?t=166937&highlight=Decat Tasha.

Hi, Revo stage 2 will defo map out the second probe, it's what I ran when I went Decat, and no you will not need a spacer the only requirment is you need to keep the probe plugged in but there is no requirment for it to remain fitted in the DP, mine is mounted under the scuttle panel. Tasha.

Hi, basically what's happens is not a lot, unfortunately due to moving house my otherhalfs work commitments and a few other things it's not yet finished. I have been accumulating parts as and when they come up at the right price with a view of finishing it some time in the future. However I am...

Hi, have a search of the forum as a whole as this has been covered many times in verious diffrent sections. However in respect to your question above, my Ibiza runs one, in short It does what it says on the tin so the speak and IMO the gains are good but even if run correctly ultimately it will...

Unfortunately I never got to use mine on the quarter mile as I fitted it before fitting the bigger turbo, when I did decide to fit the turbo the head was removed to fit uprated rods etc and upon inspection of the head it was apparent it had seen some extreme heat resulting in all 4 plugs having...

I have one, it does what it says on the tin really, works well, backfires like a shot gun going off! However be warned it WILL put extra thermal stress on verious components and will result in eventual failure of these components. Tasha.

Should help a bit, I got a full set of race ones for a track car but there are plenty of people happy with the road ones. http://www.seatcupra.net/forums/showthread.php?t=54400

Hi guys, sorry for delay only just seen this, as R4cup says its an eBay cooler although it's not from toyo (well at least they were not called that back when I got the cooler almos 4 years ago), the company was importing them in bulk from the states I believe. The build quality is quite good, it...

Oulton broad, although you won't see the ibiza about if your local as it's been off the road for quite some time now whilst my other half complet's a BT conversion on it, I have a mk2 facelift Leon now so have pritty much given the ibiza to my Bf to play with as he has just sold his last project.

You should have been supplied with a small transition tube as the jetex cat back tube is slightly diffrent size to the stock DP/Cat. This is how mine is anyway, i dont run my center section any more as i have a non res section, and custom DP so i have the center section laying in the garage...

Lots of brake info here, Bill does his own discs 8 grove and elipticly grooved iirc.http://www.seatcupra.net/forums/showthread.php?t=199990

300x600x76mm, with the water rad and air con rad both still in the stock location. [/IMG]