Search results

thats right! sold my 4x4 leon and bought back my ibiza toy car:)

Can't see how this ARB will have any effect on a stiff rear axel ? Please enlighten me :D

bought myself a cheap intercooler setup ! 235 dollar in total! 600x300x76mm Core ! large one :)

Thnx mate ! What I thought!

How do i find out ? What engines and years came with VVT ? Need to replace my cam chain tensioner ! !

Head display turning on and off fixxed with a relay now ! turning the display completly of when igniton is of !

Got my little go-cart back yes ! After Fitting resistors i believe the missfire has ended a long with CEL going off ! And I have a feeling it was about Lambda regulation when the CEL was on!

Resistors fittet where the SAI, N112, N249 and Evap where... CEL dissapeared :) But then the ABS and TCS light dissapeared for a while also, to my surprise ! But then again, it came back on so Im starting to think the pump needs to get replaced

Updates `? :D

How exactly do they map out the fault codes?

Everything is bypassed yes, and trows a Cel. This was done 2 years ago. But i have ordered some resistors. Is my intake temp realy high ? 54° c

More logs @ my Car thread Block 032, Lamda always shows 0.0%

3rd. Gear Meassure. Block; 002 & 020 Group A:,'002 Group B:,'020 - Idle Stabilization /min, %, ms, g/s, STAMP, °KW,°KW,°KW,°KW 1040, 13.5, 2.05, 2.72, 0.24, 0.0,0.0,0.0,0.0,,,,, 1120, 67.7, 9.84, 16.36, 0.85, 0.0,0.0,0.0,0.0,,,,, 1240, 78.2, 11.07, 19.89...

4th. Gear meassure Group A:,'002 Group B:,'115 Group C:,'118 /min, %, ms, g/s, /min %, mbar mbar /min, °C, %, mbar 1080 13.5 2.05, 2.72, 1120 12.8 1030.0 1040.0 1080, 14.0, 0.0, 1040.0 1080 70.7 9.84, 16.08...

New MAF fitted! A bit higher g/s now, but still small amount of boost i think. And shutters/missfires sometimes at full throttle !

4th. Gear meassure to night Group A:,'002 Group B:,'115 Group C:,'118 /min, %, ms, g/s, /min %, mbar mbar /min, °C, %, mbar 1080 13.5 2.05, 2.72, 1120 12.8 1030.0 1040.0 1080, 14.0, 0.0, 1040.0 1080 70.7 9.84...

001 are just lambda and temp ? det lamda shows 0.0 all the time, in this case. The low boost, could it be as simple as my turbo beeing worn out ? im taking a run today, with 002 and 020, and a run with 032, 115 and 118 then. And try to post it up, for you to look at :whistle:

Plugs are new. Is it possible to read coil voltage to see what coil is broken ? I dont get any missfire fault code, i find that strange.

RPM,Load,Inj. On Time,Mass Flow,,Voltage,Voltage,Bin. Bits,Bin. Bits,,RPM,Load,Absolute Pres.,Absolute Pres. r/min, %, ms, g/s,, V, V r/min, %, mbar mbar 2440 17.3 2.46 9.33 56.06 0.080 0.070, , 2440 16.5 1020.0 1050.0 3000 103.0...

You experts got som tips on tidy the excel log scheme up a bit ? looks a mess when first opening it ? :S